Инструкция для EXTRON ELECTRONICS IN1608 MA User Guide, IN1608 SA User Guide, IN1606 User Guide, IN1608 Series User Guide

(скачивание инструкции бесплатно)
Формат файла: PDF
Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
background image

 

IN1606 and IN1608 Series Scaling Presentation Switcher • Introduction

6

General

• 

Supported HDMI specification features — Includes data rates up to 6.75 Gbps, 
Deep Color, and HD lossless audio formats

• 

HDCP-compliance — Fully supports HDCP-encrypted sources, with selectable 
authorization for unencrypted content.

• 

HDCP authentication and signal presence confirmation — Provides real-time 
verification of HDCP status for each digital video input and output. This allows for quick 
signal and HDCP verification through front panel LEDs, RS-232, USB, or Ethernet, 
providing feedback to a system operator or helpdesk support staff.

• 

HDCP Visual Confirmation — Sends a full-screen green signal when  
HDCP-encrypted content is transmitted to a non-HDCP compliant display, providing 
immediate visual confirmation that protected content cannot be viewed on the display.

• 

Bidirectional RS-232 and IR insertion for AV device control  
(IN1608 models only) — Transmits RS-232 control and IR signals alongside the video 
signal over DTP connections, allowing the remote device to be controlled without the 
need for additional cabling. Bidirectional control extension eliminates the need for 
control system wiring to remote devices.

• 

Remote powering of DTP transmitters and receiver (IN1608 models only) — 
Provides power to two remote DTP 230 transmitters and a remote DTP 230 receiver 
over each twisted pair connection, eliminating the need for separate power supplies at 
the remote units.

• 

Key Minder — Authenticates and maintains continuous HDCP encryption between 
input and output devices to ensure quick and reliable switching in professional AV 
environments, while enabling simultaneous distribution of a single source signal to one 
or more displays.

• 

Advanced scaling engine — Scales inputs to a common high resolution output with 
30-bit processing and 1080i deinterlacing.

• 

EDID Minder — Ensures that all sources power up properly and reliably output content 
for display.

• 

SpeedSwitch Technology — Provides high-speed switching for HDCP-encrypted 
content.

• 

Aspect ratio control — Controls the aspect ratio by selecting a Fill mode, which 
provides a full screen output, or a Follow mode, which preserves the original aspect 
ratio of the input signal.

• 

Image freeze control — Freezes a live image.

• 

Auto-Image — Automatically detects the resolution of the incoming video signal. 

• 

Auto Input Memory — Automatically stores size, position, and picture settings based 
on the incoming signal. When the same signal is detected again, these image settings 
are automatically recalled from memory.

• 

On-screen menus — Allows for easy system setup using the front panel controls. 
Key parameters such as input and output video formats and resolutions are grouped 
on the initial Quick Setup screen, while additional screens provide full control over other 
functions and settings.

• 

Output Standby Mode — Mutes video and sync output to the display device when 
no active input signal is detected. This allows the projector or flat-panel display to 
automatically enter into standby mode to save energy and enhance lamp or panel life.

• 

Power Save Mode — Conserves energy when the unit is not in use.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
Оглавление инструкции

Document Outline