Инструкция для EXTRON ELECTRONICS IN1608 MA User Guide, IN1608 SA User Guide, IN1606 User Guide, IN1608 Series User Guide

(скачивание инструкции бесплатно)
Формат файла: PDF
Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
background image

 

IN1606 and IN1608 Series Scaling Presentation Switcher • Installation

13

Twisted Pair Recommendations for DTP Communication

Use the following pin configurations for twisted pair cables.

Figure 11. 

Twisted Pair Cable Configuration

Supported cables

The scalers are compatible with CAT 5e, 6, 6a, and 7 shielded twisted pair (F/UTP, SF/UTP, 
and S/FTP) and unshielded twisted pair (U/UTP) cable. 

ATTENTION:  Do not use Extron UTP23SF-4 Enhanced Skew-Free AV UTP cable or 

STP201 cable to link the scaler with DTP transmitters or receivers.

Cable recommendations

Extron recommends using the following practices to achieve full transmission distances up 
to 230 feet (70 meters) and reduce transmission errors.

• 

Use the following Extron XTP DTP 24 SF/UTP cables and connectors for the best 
performance:

• 

XTP DTP 24/1000 

Non-Plenum 1000’ (305 m) spool 

22-236-03

• 

XTP DTP 24P/1000  Plenum 1000’ (305 m) spool 

22-235-03

• 

XTP DTP 24 Plug 

Package of 10 

101-005-02

• 

If not using XTP DTP 24 cable, at a minimum, Extron recommends 24 AWG, solid 
conductor, STP cable with a minimum bandwidth of 400 MHz.

• 

Terminate cables with shielded connectors to the TIA/EIA-T568B standard.

• 

Limit the use of more than two pass-through points, which may include patch points, 
punch down connectors, couplers, and power injectors. If these pass-through points 
are required, use CAT 6 or 6a shielded couplers and punch down connectors.

NOTE:  When using CAT 5e or CAT 6 cable in bundles or conduits, consider the 

following: 

• 

Do not exceed 40% fill capacity in conduits.

• 

Do not comb the cable for the first 20 m, where cables are straightened, aligned, 
and secured in tight bundles.

• 

Loosely place cables and limit the use of tie wraps or hook and loop fasteners.

• 

Separate twisted pair cables from AC power cables.

Pin

T568B 

Wire Color

1

White-orange

2

Orange

3

White-green

4

Blue

5

White-blue

6

Green

7

White-brown

8

Brown

12345678

RJ-45

Connector

Insert Twisted

Pair Wires

Pins:

Pin

1

2
3
4
5
6
7
8

Wire color

White-green

Green
White-orange
Blue
White-blue
Orange
White-brown
Brown

Wire color

T568A

T568B

White-orange

Orange
White-green
Blue
White-blue
Green
White-brown
Brown

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
Оглавление инструкции

Document Outline