Инструкция для EXTRON ELECTRONICS IN1608 MA User Guide, IN1608 SA User Guide, IN1606 User Guide, IN1608 Series User Guide

(скачивание инструкции бесплатно)
Формат файла: PDF
Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
background image

IN1606 and IN1608 Series Scaling Presentation Switcher • Operation

14

Operation

This section contains information on the front panel operation, On-screen Display Menu 
System, and reset modes of the scalers. Topics in this section include:

• 

Front Panel Overview

• 

Powering Up

• 

Input Selection

• 

On-Screen Display (OSD) Menu System

• 

Front Panel Lockout (Executive Modes)

• 

Reset Modes

Front Panel Overview

The scalers have the same front panel features except for the number of input selection 
buttons and input and output LED indicators.

VOLUME

SCALING PRESENTATION SWITCHER

IN1608

INPUTS

1

HDCP

SIGNAL

OUTPUTS

ENTER

MENU

Extron

2

3

4

5

6

7

8

A

B

C

INPUTS

1 2 3 4 5 6 7 8

CONFIG

Figure 12. 

Front Panel Features (IN1608)

Config port — Connect a host device to the mini-USB B connector.

b

  Input selection buttons — Press one of these buttons to select an input. The buttons 

light amber for audio and video selections, red for audio-only selections, or green for  
video-only selections. The number of input selection buttons depends on the scaler 
model (The IN1606 has six and the IN1608 models have eight).

Input and output LED indicators
The number of input and output LED indicators depends on the scaler model.
Input signal LEDs — Light for each input when active video content is detected.
Output signal LEDs — Light green when active video is being output or blink amber 
when video output and sync are disabled from the scaler.
Input HDCP LEDs — Light for each input signal that is HDCP-encrypted. Analog 
inputs 1 and 2 cannot be HDCP-encrypted.
Output HDCP LEDs — Light for the active output when it is HDCP-encrypted.

Menu button — Press this button to enter or exit the OSD menu system.

Enter button — Press this button to select options from the OSD menu system.

Direction buttons — Press any of the four buttons to navigate the OSD menu system 
or change values of adjustable features.

Volume knob — Rotate this knob to adjust output (default), program, or mic volume.
Volume LEDs — Light in order from bottom to top according to the audio volume 
level. There are eight LED steps from 1% (-99 dB) to 99% (-1 dB). Every quarter turn of 
the volume knob equates to a one step increment (about 12.5%). When the volume is 
muted (0%), the bottom LED blinks. When the volume is at 100%, the top LED blinks.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
Оглавление инструкции

Document Outline