Инструкция для EXTRON ELECTRONICS IN1608 MA User Guide, IN1608 SA User Guide, IN1606 User Guide, IN1608 Series User Guide

(скачивание инструкции бесплатно)
Формат файла: PDF
Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
background image

 

IN1606 and IN1608 Series Scaling Presentation Switcher • Configuration Software

57

Connect

This option connects a device tab in emulation mode to 
a device. The page goes from emulation mode to live 
mode and current device settings are displayed. The tab 
indicator changes from gray (not connected) to green 
(connected).

NOTE:  If a device is already connected, the 

Connect

 

option is disabled until the device is disconnected or 
the connection times out.

1. 

From the 

Connections

 menu, select 

Connect

. The 

Connection Settings window opens (shown at right).

2. 

Select the connection method from the list of radio 
buttons.

• 

Select the 

TCP/IP

 radio button if the device is connected to the host device 

through a LAN or WAN.
Enter the device IP address or hostname in the 

IP Address

 field. If the device is  

password-protected, enter the password in the 

Password

 field.

• 

Select the 

RS-232

 radio button if the device is connected to the host device 

through an RS-232 connection.
Select the desired values from the 

COM Port

 and 

Baud Rate

 drop-down menus.

NOTE:  The default baud rate is 9600.

• 

Select the 

USB

 radio button if the device is connected to the host device through 

the front panel mini-USB connector. Select the device from the list of devices.

3. 

Click the 

OK

 button to connect to the device.

Disconnect

This option disconnects the PCS program from the connected device and returns it to 
emulation mode.
From the 

Connections

 menu, select 

Disconnect

. The scaler tab enters emulation mode.

NOTE:  If a device is already disconnected, the 

Disconnect

 option is disabled until the 

device is connected.

Exit

This option disconnects the scaler from the software and closes the application.
From the 

Connections

 menu, select 

Exit

. The application closes.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
Оглавление инструкции

Document Outline