Инструкция для EXTRON ELECTRONICS IN1608 MA User Guide, IN1608 SA User Guide, IN1606 User Guide, IN1608 Series User Guide

(скачивание инструкции бесплатно)
Формат файла: PDF
Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
background image

 

IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages

64

Auto-Image

Select the 

Auto-Image

 check box of the desired input to enable an automatic Auto-Image 

to an input. When enabled, Auto-Image is applied whenever there is a change in the input 
sync. Auto-Image attempts to size and center the input signal based on the aspect ratio 
setting.
By default, the Auto-Image threshold is 25% brightness. Analog video signals greater 
than the threshold are considered active video. To change the threshold value, use SIS 
commands (see 

Auto-Image threshold value

 on page 40).

Auto Memory

Select the 

Auto Memory

 check box of the desired input to enable the Auto Memory (see 

the 

Auto Memory and Auto-Image Interaction table

 on page 27 for a summary of the 

interaction between Auto Memory and Auto-Image). Auto Memory recalls input and image 
settings for signals that have previously been applied. When Auto Memory is disabled, the 
scaler treats every newly applied input as a new source.

HDCP Authorized

Select the 

HDCP Authorized

 check box (inputs 3 and higher) to enable or disable the 

HDCP Authorized feature. This feature determines if a digital input will report as an HDCP 
authorized sink to a source.

NOTE:  This option is not available for analog inputs 1 and 2.

For source devices that require encryption, enable HDCP Authorized. If HDCP Authorized 
is disabled for sources that require encryption (for example, a Blu-ray player), the output is 
muted or a warning message is displayed.
Some source devices may encrypt their output even if the source material does not require 
HDCP encryption, preventing content from being displayed on a non-HDCP compliant 
display. Disable HDCP Authorized to allow the output of the scaler to remain unencrypted.

Film Detect

Select the 

Film Detect

 check box of the desired input to enable automatic 3:2 and 2:2 

film pulldown detection for NTSC, PAL, SECAM, and 1080i input signals.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
Оглавление инструкции

Document Outline