Инструкция для EXTRON ELECTRONICS IN1608 MA User Guide, IN1608 SA User Guide, IN1606 User Guide, IN1608 Series User Guide

(скачивание инструкции бесплатно)
Формат файла: PDF
Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
background image

 

IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages

90

To clear a preset:

1. 

Select the input preset or user preset to be cleared.

2. 

Click the 

Clear

 button located in the same section of the screen. A confirmation dialog 

box opens.

3. 

Click the 

Clear

 button to erase saved data or click the 

Cancel

 button to return to the 

Preset Management page.

To rename a preset:

1. 

Double-click a Preset Name or right-click a Preset Name and select 

Rename

.

2. 

Enter a new preset name and press the <Enter> key.

Device Settings Page

The Device Settings page allows configuration of Screen Saver settings, on-screen display 
timeout, HDCP notification, and video and sync muting. Click the 

Device Settings

 button 

on the Global Navigation Bar to open the Device Settings page.

Figure 54. 

Device Settings Page

Screen Saver panel

When no active video is detected on the selected input, the screen saver mode is activated. 
The output sync can be disabled after a user-set duration, which allows display devices to 
go into a low power, standby state.

1. 

Click one of the radio buttons to select a display when the screen saver is enabled.

• 

Black

 — Mutes video output to black for a set duration before disabling output 

sync (default).

• 

Blue with On Screen Display (OSD) Bug

 — Displays a blue background with 

a moving OSD message that indicates “<

scaler model

>

: Input 

<

number

>

 No 

Signal

” for a set duration before disabling the output sync.

2. 

Select a duration to display the screen saver before the output sync is disabled.

• 

Select the 

Disable Sync When No Input Signal Is Detected

 check box to 

disable the scaler output sync after a set duration without an active input. When 
selected, the 

Duration On Screen

 field becomes available.

• 

In the 

Duration On Screen

 field, enter a value in the field or click the 

Up

 and 

Down

 

arrows to specify a duration to wait before disabling output sync during inactivity. 
The default is to never disable the output sync.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
Оглавление инструкции

Document Outline