BCF 860 Baby Monitor
Please read and observe the following in
formation and keep the operating manual
nearby for future reference!
• Risk of fatal injury through cable!
Ჾ Children could become entangled in the cables and strangle
Ჾ Ensure that the baby monitoring units and power cables are
out of reach of babies/children, i.e. they are at least one meter
• Risk of explosion!
Ჾ Only use the power adapter plugs supplied!
Ჾ Only use batteries supplied or ones of the same type!
Ჾ Always treat batteries with due care and attention and only
use batteries as described.
Ჾ Never use standard and rechargeable batteries together.
Never use rechargeable batteries or standard batteries with
different capacities or charge statuses together. Never use
standard or rechargeable batteries which are damaged.
• Risk of suffocation through small objects, packaging and
Ჾ Keep children away from the product and its packaging!
• Risk of fire through power adapter plugs!
Power adapter plugs can heat up.
Ჾ Never leave any objects on the power adapter plugs. Ensure
access to power adapter plugs is not obstructed by furniture or
• Risk of tripping due to improperly laid cable!
Ჾ Lay the cables so that nobody can trip over them!
• Risks to health and the environment from batteries!
Ჾ Never open, damage or swallow batteries or allow them to
pollute the environment. They could contain toxic and ecolo
gically harmful heavy metals.
2 button: Change transmitter unit
button: Feed alert / Zoom
button: Confirm input / Open menu
button: Navigation in menu
button: Talk button / Back
10 AV port (3.5 mm socket)
11 LED, status indicator
button: Receiver unit on/off switch
13 SD card slot
14 Power adapter socket
16 Battery compartment
button: Transmitter unit on/off switch
18 LED, status indicator
20 LED, night vision
button: Increase volume
button: Reduce volume
24 Temperature sensor
25 Power adapter socket
26 Light sensor
The baby monitor serves to monitor a baby/child in a room. The
transmitter unit, located near the child, transmits noises and images
from its immediate vicinity to the receiver unit. Any other use is con
sidered unintended use. Unauthorised modification or reconstruction
is not permitted. Under no circumstances open the devices or com
plete any repair work yourself.
The devices are not intended for medical purposes. Warning
and signal tones from respiratory or heartbeat monitoring equip
ment are not transmitted.
Use only in suitable environments
Observe all local directives and regulations.
Prevent excessive exposure to smoke, dust, vibration, chemicals,
moisture, heat and direct sunlight.
- Receiver unit
- Transmitter unit
- Base for transmitter unit
- Battery for receiver unit
- 2 power adapter plugs
- Operating manual
Display and explanation of operations
Action to take
Result of action
Reference in the graphic
Press the button
Press and hold the button
Keep the button pressed for 5 seconds
Select menu options by pressing the Navigation
and confirm it by pressing
Menu option in the display
Icon in the display
Inserting the battery in the receiver unit
Ჾ Slide the cover on the rear downwards and remove it.
Ჾ Insert the battery in the battery compartment , ensure correct
Ჾ Close the battery compartment.
Charge the batteries for at least 12 hours when charging for the
first time and ensure they are subsequently discharged and
charged fully. This aids a long service life of the batteries.
Inserting the SD card in the receiver unit
In order to record videos or pictures, an SD card must be inserted
Ჾ Insert the SD card in the slot  provided Ჿ The SD card
latches audibly in place.
Putting the receiver unit into operation
The receiver unit can be powered by the battery, by a normal mains
power supply via the power adapter plug or by a USB connection on
Connecting the receiver unit
Ჾ Connect the power adapter to the power adapter socket  on
the receiver unit and a properly installed mains power outlet.
Switching the receiver unit on/off
Ჾ  5 sec. ᳠ Ჿ Receiver unit is switched on, start screen
appears in the display.
Ჾ  5 sec. ᳠ Ჿ Receiver unit is switched off, the display
Operating and charge indicators on the receiver unit
The status indicator LED  lights up.
Ჿ The receiver unit is
Putting the transmitter unit into operation
The transmitter unit is not equipped with a built-in battery. It can only
be operated via the mains power supply using the power adapter
Connecting the transmitter unit
Ჾ Connect the power adapter to the power adapter socket  on
the transmitter unit and a properly installed mains power outlet.
Switching the transmitter unit on/off
The transmitter unit continues to transmit even when the receiv
er unit is switched off. The signals can be received by other
devices. A maximum of 4 transmitter units can be registered on the
Ჾ  5 sec. ᳠ Ჿ Transmitter unit is switched on, operating
indicator lights up green.
Registering a transmitter unit
Registration occurs automatically when the transmitter unit is
Ჿ The image from the camera appears in the display.
Selecting a transmitter unit
If several transmitter units are registered, a transmitter unit can be
selected manually. Transmitter unit 1 is selected as standard.
Ჾ 1x  Ჿ ┠Wait for connecting….┨ appears in the display, transmit
ter unit 2 is selected.
Ჾ 2x  Ჿ ┠Wait for connecting….┨ appears in the display, transmit
ter unit 3 is selected.
Ჾ 3x  Ჿ ┠Wait for connecting….┨ appears in the display, transmit
ter unit 4 is selected.
Icons in the display
Ჿ Signal strength
The equipment has a range of up to 300 m. The range can be
reduced by obstructions, such as walls etc. Electronic equip
ment in the vicinity can also cause disturbance.
Ჿ Feed alert is activated
Ჿ Battery is full
Ჿ Battery is empty
When the battery is being charged, bars continually run through
the battery icon.
VOX mode (voice activation)
When VOX mode is activated, the display is switched off after a short
time (┠ECO Mode activated┨ appears in the display) and is switched on
again after detecting a sound.
Switching VOX mode off
 Ჽ ┠VOICE SENSOR┨ Ჽ ┠OFF┨
᳠ Ჿ Voice communication is possible from the receiver
unit to the transmitter unit.
Night vision function
If the brightness of the area monitored no longer suffices for normal
operation, the equipment automatically switches to night vision.
When the night vision function is activated, only objects up to
2 m away can be viewed.
In order to take a photo, an SD card (not included) must be installed
in the receiver unit .
Ჿ The photo icon appears briefly in the display, the
photo is stored on the SD card.
In order to record a video, an SD card (not included) must be in
stalled in the receiver unit.
Ჿ The video icon appears briefly in the display, the
video is stored on the SD card.
Setting the feed alert
You can set-up an acoustic feed alert to be sounded at 30 minute
intervals within a time period of 30 minutes to 4 hours.
Ჾ , repeatedly if necessary.
Settings using the menu
The menu can be used to execute various functions and define
diverse settings. All the settings are confirmed by pressing the
button . Press the
button  to skip one menu level back.
You can set-up alert signals to be sounded in the event of connec
tion problems between the receiver and transmitter units or if the
battery charge in the receiver unit is low.
Alert signal for connection difficulties
You can set-up an alert signal to be sounded in the event of connec
tion problems between the receiver and transmitter units.
 Ჽ ┠ALERT RINGTONE┨ Ჽ ┠No Connect Alarm┨ Ჽ ┠ON┨/┠OFF┨
Alert signal for low battery charge
You can set-up an alert signal to be sounded in the event the battery
in the receiver unit must be recharged.
 Ჽ ┠ALERT RINGTONE┨ Ჽ ┠Low Battery Alarm┨ Ჽ ┠ON┨/┠OFF┨
 Ჽ ┠SCREEN DISPLAY┨ Ჽ ┠Brightness┨ Ჽ ┠Level 1┨
- ┠Level 5┨
You can define how long the display should remain on after the last
time a button was pressed.
 Ჽ ┠SCREEN DISPLAY┨ Ჽ ┠LCD Backlight Time┨ Ჽ
┠Keep On ┨/┠10 sec┨/┠20 sec┨/┠30 sec┨/┠1 min┨/┠3 min┨
 Ჽ ┠SCREEN DISPLAY┨ Ჽ ┠Picture Mode┨ Ჽ ┠Standard┨/┠Vivid┨
You can play lullabies on the transmitter unit. Settings, such as the
volume, are adjusted using the receiver unit.
Ჽ ┠LULLABIES┨ Ჽ ┠Lullaby 1┨ - ┠Lullaby 8┨ [Select an entry] Ჽ
Ჽ ┠LULLABIES┨ Ჽ ┠Play All┨
Ჽ ┠LULLABIES┨ Ჽ ┠Lullaby 1┨ - ┠Lullaby 8┨ Ჽ ┠Play Repeat┨
Setting the volume
You can alter the volume at which the lullabies are played.
 Increase the volume
 Reduce the volume
Ჽ ┠VOICE SENSOR┨ Ჽ ┠High┨
If the ┠VOICE SENSOR┨ is set to ┠OFF┨, image and sound are
You can set the temperature unit, the highest and lowest temperat
ure limits and the display of the temperature for the environment
monitored. You can also define whether an acoustic alert signal
should be issued if the ambient temperature moves outside the spe
 Ჽ ┠TEMPERATURE┨ Ჽ ┠Scale┨ Ჽ ┠Celsius┨/┠Fahrenheit ┨
 Ჽ ┠TEMPERATURE┨ Ჽ ┠Minimum┨
 Ჽ ┠TEMPERATURE┨ Ჽ ┠Maximum┨
 Ჽ ┠TEMPERATURE┨ Ჽ ┠ALERT RINGTONE┨ Ჽ ┠ON┨/┠OFF┨
 Ჽ ┠LANGUAGE┨ Ჽ ┠English┨/┠Français┨/┠Deutsch┨/┠Nederlands┨
Browsing through the SD card
You can browse through the photos and videos recorded on the SD
card on the receiver unit and deleted them, if necessary.
Displaying photo recordings
 Ჽ ┠SD BROWSER┨ Ჽ ┠Play┨ Ჽ
Ჿ Photo is displayed
Displaying video recordings
 Ჽ ┠SD BROWSER┨ Ჽ ┠Play┨ Ჽ
ᲿVideo is displayed
Time and date
 Ჽ ┠TIME SET┨ Ჽ Set the time
 Ჽ ┠TIME SET┨ Ჽ Set the date
Connecting to a television
Connect the receiver unit  to the AV input of a television set using
a suitable AV cable (not included).
Power adapter plug, receiver unit
Using the energy-efficient power adapter plug (input 100-240 V
output 6 V
, 790 mA) the zero load is approx. 0.04 - 0.06 W. The
average efficiency is approx. 71.94 %. The maximum power con
sumption is approx. 4.14 W.
- Страница 1 из 3
• Risks to health and the environment from batteries! Ჾ Never open, damage or swallow batteries or allow them to pollute the environment. They could contain toxic and ecolo gically harmful heavy metals. BCF 860 Baby Monitor Operating elements 1 6 5 2 3 10 11 12 13 14 7 4 8 9 15 16 17 18 19 20 21
- Страница 2 из 3
Power adapter plug, transmitter unit Using the energy-efficient power adapter plug (input 100-240 VAC, output 6 VDC, 790 mA) the zero load is approx. 0.04 - 0.06 W. The average efficiency is approx. 71.94 %. The maximum power con sumption is approx. 3 W. Service hotline In the case of technical
- Страница 3 из 3