1. Product Features

1.  Aluminum alloy enclosure (light weight and durable)

2.  Relative/absolute measurement interchange at any position

3.  With 3 built-in magnets in measuring surface, which is convenient to be attached 

to the object measuring workpiece

4.  Power-off automatically in 5 minutes

5.  Portable size, convenient to co-work with other measuring tools and enlarge 

measuring range

2. Technical Parameters

1.  Measuring range: 4*90:

2.  Resolution: 0.05°

3.  Accuracy: ±0.2°

4.  Repeatability: 0.1 °

WARRANTY DOESN’T EXTEND TO FOLLOWING CASES:

1. If the standard or serial product number will be changed, erased, removed or wil be unreadable.

2. Periodic maintenance, repair or changing parts as a result of their normal runout.
3. All adaptations and modifications with the purpose of improvement and expansion of normal sphere of product application, mentioned in the service instruction, without tentative 
written agreement of the expert provider.
4. Service by anyone other than an authorized service center.
5. Damage to products or parts caused by misuse, including, without limitation, misapplication or nrgligence of the terms of service instruction.
6. Power supply units, chargers, accessories, wearing parts.
7. Products, damaged from mishandling, faulty adjustment, maintenance with low-quality and non-standard materials, presence of any liquids and foreign objects inside the product.
8. Acts of God and/or actions of third persons.
9. In case of unwarranted repair till the end of warranty period because of damages during the operation of the product, it’s transportation and storing, warranty doesn’t resume.

For more information you can visit our website 

WWW.ADAINSTRUMENTS.COM

 

or write the letter with your questions on 

info@adainstruments.com

WARRANTY CARD

Name and model of the product    ___________________________________________

Serial number                                ________________date of sale__________________

 

Name of commercial organization ________________stamp of commercial organization

Warranty period for the instrument explotation is 24 months after the date of original retail 

purchase. 

During this warranty period the owner of the product has the right for free repair of his 

instrument in case of manufacturing defects.

Warranty is valid only with original warranty card, fully and clear filled (stamp or mark of 

thr seller is obligatory).

Technical examination of instruments for fault identification which is under the warranty, is 

made only in the authorized service center.

In no event shall manufacturer be liable before the client for direct or consewuential dam-

ages, loss of profit or any other damage which occur in the result of the instrument out-

age.

The  product  is  received  in  the  state  of  operability,  without  any  visible  damages,  in  full 

completeness. It is tested in my presence. I have no complaints to the product quality. I 

am familiar with the conditions of qarranty service and i agree.

purchaser signature _______________________________

Before operating you should read service instruction!

                   

If you have any questions about the warranty service  

and technical support contact seller of this product  

Certificate of acceptance and sale

___________________________________________________

___________________________________________________

____________________________________№_____________

                

name and model of the instrument

Corresponds to ______________________________________         

designation of standard and technical requirements

Data of issue ________________________________________

Stamp of quality control department

Price

Sold       ____________________________________________ 

name of commercial establishment

Date of sale _________________________________________

Pro

Digit

 MICRO

Operating manual

INCLINOMETER ProDigit MICRO

5.  Battery: 9V battery

6.  Working temperature: 0°C ~40°C

7.  Dimension: 57*57*30.5mm

8.  With 3 diameter 10mm built-in magnets in measuring surface, which is conve-

nient to be attached to the object measuring workpiece

9.  Absolute zero measurement based on the horizontal surface

10.  N. Weight: 0.13kg

3. Operating Instructions:

1.  Press the «ON/OFF» button, it turns on, and the LCD displays absolute horizon-

tal angle. Press “ON/OFF” button again, it turns off.

2.  Measurement Initially displays 0.0° on the LCD at the beginning, when it dis-

plays

«A» on the left side on the right

side , it means the left side is higher and right side lower; when it displays «▼» 

on the left side «▲» on the right side, it means the left side is lower and right side 

higher.

3.  Put the instrument on the horizontal stand, and press the «ZERO» button, the 

value returns to zero, and the read-out is the angle value measured angle value 

relatively to the horizontal stand.

4.  Press the «HOLD» button, the value on the screen will be locked.

5.  The magnets at the bottom allows the instrument to be attached onto iron ma-

terial measurement object. Press the «ZERO» button, reset the value to proceed 

relative measurement.

4. Application:

More widely application is in wood processing industry (especially in furniture manu-

facturing industry) for wood angle accurate cutting; auto repair industry for tiring as-

sembling angle accurate controlling; in machining industry for machine tool working 

angle accurate positioning, and large vehicle arm rotation angle etc.

5. Packing:

Product size: 57*57*30.5mm Product packing: white box/93*82*40mm

Manufacturer: ADAINSTRUMENTS          Address: WWW.ADAINSTRUMENTS.COM