FD2XA / FD2XC1 / FD2XC2
FILTERS
Polígono Industrial Moncada II
·
C/. Pont Sec, 1c
·
46113 MONCADA - Valencia (Spain)
·
Tel. ( 34 ) 96 130 13 75
·
Fax ( 34 ) 96 130 15 07
·
http://www.beyma.com
·
E-mail: beyma@beyma.com
·
•
2 way filters
•
12 dB/oct. attenuation slope
•
Additional high frequency attenuation
•
High power components
•
Specially designed for the use with Beyma coaxials
KEY FEATURES
These 2 way passive filters have been specifically designed to be used with the XA and XC Beyma coaxials, in order to achieve
an optimum performance of these drivers. Please, see attached filter selection guide to find the suitable filter model for each
coaxial model.
These filters offer the possibility of an additional attenuation of the high frequency unit. Anyway, this attenuation is only optional,
optimum performance of the coaxial is achieved without using it. However, if you wish to use it you can activate it by simply
removing the aluminium bridge labeled as «AT» on the back surface of the board (please see attached picture).
GENERAL DESCRIPTION
Type
Crossover frequency*
Power capacity
Low / High frequency impedance
Attenuation slope
H.F. attenuation
2 way
1.8 / 2 / 2.2 kHz
600 w
8 / 16 ohms.
12 dB/oct.
0, -1.5 dB
TECHNICAL SPECIFICATIONS
ADDITIONAL HF ATTENUATION
TRANSFERENCE FUNCTIONS
Use with 15XA38Nd & 12XA30Nd
Use with 12XC30 & 8XC20
Use with 10XC25
FD2XA
FD2XC1
FD2XC2
FILTER SELECTION GUIDE
FILTER SELECTION GUIDE
Note: FD2XA transference function.
Note: FD2XC1 transference function.
Note: FD2XC2 transference function.
*Note: crossover frequency depends on model (FD2XA / FD2CX2 / FD2XC1).
0562203
