25.4 mm.
1 in.
90º (-2º,-18º)
(-6 dB, 2 -16 kHz)
40º (+34º,-3º)
(-6 dB, 2 -16 kHz)
11.2 (average 800 -16 kHz)
10,2 dB (+2 dB, -6.4 dB)
1200 Hz
202x202x145 mm.
7.95x7.95x5.7 in.
177 x 142 mm.
6.97 x 5.59 in.
1 kg. 2.2 lb.
1.3 kg. 2.86 lb.
Cast aluminium
•
Designed to be used with 1 inch compression drivers
•
Coverage angles of 90ª in the horizontal plane and
40º in the vertical plane
•
Precise directivity control in the pass band
•
Square and compact design, providing versatile mounting
options.
•
Cast aluminium construction
Throat diameter
Horizontal beamwidth
Vertical beamwidth
Directivity factor (Q)
Directivity factor (DI)
Cutoff frequency
Dimensions (WxHxD)
Cutout dimensions (WxH)
Net weight
Shipping weight
Construction:
069
Note: on axis frequency response measured with CP385/Nd standing on infinite baffle in anechoic chamber, 1w @ 1m.
TECHNICAL SPECIFICATIONS
GENERAL DESCRIPTION
KEY FEATURES
FREQUENCY RESPONSE AND DISTORTION CURVES
TD-194
CONSTANT DIRECTIVITY HORN
This horn has been designed to work especifically with 1 inch compression drivers, providing uniform on and off-axis response.
The constant directivity characteristics of this model ensure the ability to cover 90º width horizontally and 40º width vertically,
at virtually any frequency within its operational range. To ensure freedom of resonance, this horn is constructed of cast
aluminium, with flat front finish to facilitate flush mounting. Its square shape allows to easily rotate the horn without any need for
modification in the cabinet.
