Страница 3 из 75 Contents 1. Introduction .....................................................................................................................................................4 1-1 Product
Страница 4 из 75 DVG-2024S User’s Manual Product Overview 1. Introduction 1-1 Product Overview The DVG-2024S is designed to carry both voice and facsimile over the IP network. It uses the industry standard SIP call control protocol so as to be compatible with free registration services or VoIP service providers’
Страница 5 из 75 DVG-2024S User’s Manual Telephone Interface Description 1-2 Hardware Description Indicators Power: Power LED. A steady light indicates a proper connection to a power source. VoIP: The VoIP LED will turn on when the VoIP Gateway is connected to a VoIP service provider. The LED will blinking if not
Страница 6 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 2. Getting Started To access the web-based configuration utility, open a web browser such as Internet Explorer and enter the IP address of the DVG-2024S. Open your Web browser and type http://192.168.8.254 into the URL address box. Press the Enter
Страница 7 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration Click Setup Wizard and Next. It is highly recommended to create a login ID and password to keep your gateway secure. Click Next. D-Link Systems, Inc. 7
Страница 8 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration Enter a NTP server or use the default server. Click Next. D-Link Systems, Inc. 8
Страница 9 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration Select your Internet connection type: DHCP – Most Cable ISPs or if you are connecting the DVG-2024S behind a router. Static IP – Select if your ISP supplied you with your IP settings. PPPoE – Most DSL ISPs. PPTP – Select if required by your ISP.
Страница 10 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration Register to the SIP Proxy Server by clicking Enable support of SIP Proxy Server. Enter Proxy Server IP/Domain and Port. The Outbound Proxy Support is optional. To register, please click on the Outbound Proxy Support check box and enter Outbound
Страница 11 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration Setup is finished. Check the summary of your settings. To make new settings effective, you must click on the Restart button to reboot the DVG-2024S. Click Restart. D-Link Systems, Inc. 11
Страница 12 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3. VoIP Gateway Web Configuration 3-1 Status 3-1-1 Current Status Status → Current Status For Port Status, it includes if each port registers to Proxy successfully, the last dialed number, how many calls each port has made since the VoIP Gateway is
Страница 13 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-1-2 RTP Packet Summary Status → RTP Packet Summary Display the information of the last call made. Press Refresh button to get the latest RTP Packet Summary. D-Link Systems, Inc. 13
Страница 14 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-1-3 System Information Status → System Information For WAN Port Information, it shows IP address, subnet mask, default gateway and DNS server. If you use PPPoE to obtain IP, you will know if the IP is obtained through this method. If IP address,
Страница 15 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-1-4 Routing Table Status → Routing Table It displays routing table of DVG-2024S. 3-1-5 LAN Client The DHCP Clients table displayed LAN device that has already been assigned an address from DVG-2024S. You can check if the DHCP client has obtain an
Страница 16 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-2 FXS Line Diagnostics 3-2-1 FXS Outward Test FXS Line Diagnostics Æ FXS Outward Test It allows operator to verify whether it is some problem on the cable between Phone Sets and DVG-2024S. Enable: Select the lines you want to test. Including
Страница 17 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-2-2 FXS Inward Self Test FXS Line Diagnostics Æ FXS Inward Self Test It allows operator to verify if it is some problem on the FXS chip set. Enable: Select the lines you want to test. Including Channel In Used: Since the line test will interrupt
Страница 18 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-3 General Settings 3-3-1 WAN WAN (Wide Area Network) Settings are used to connect to your ISP (Internet Service Provider). The WAN settings are provided to you by your ISP and oftentimes referred to as "public settings". Please select the
Страница 19 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration General Settings → WAN DHCP: Select this option if your ISP (Internet Service Provider) provides you an IP address automatically. Cable modem providers typically use dynamic assignment of IP Address. The Host Name field is optional but may be
Страница 20 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration General Settings → WAN PPPoE: Select this option if your ISP requires you to use a PPPoE (Point-to-Point Protocol over Ethernet) connection. Enter the PPPoE Account, PPPoE Password and re-enter Password to confirm. General Settings → WAN PPTP:
Страница 21 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration General Settings → WAN Factory Default MAC Address: The original MAC address of the VoIP Gateway. Your MAC Address: It is left blank as you log-in via the WAN port. Current MAC Address: It shows the current MAC Address if you ever used the
Страница 22 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-3-2 LAN General Settings → LAN LAN Port Address: Enter the LAN IP address of the VoIP Gateway. It is also the default gateway for DHCP clients. Subnet Make: Enter the subnet mask for DHCP clients. General Settings → LAN Enable DHCP Server: This
Страница 23 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-3-3 QoS Settigs General Settings → QoS ToS IP Precedence: Select the precedence for signaling (data) and voice (voice data). DiffServ (DSCP): Select the number of signaling (data) and voice (voice data) values. Note: For the VoIP Gateway, ToS IP
Страница 24 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-3-4 SIP As there are various Proxy Server providers, according to RFC standard, it has designed the gateway to be compatible with them. If any registration problem occurs, please consult your Internet telephony Server Provider. General Settings →
Страница 25 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration General Settings → SIP Each line registers to Proxy independently: Number: Enter the number, text or number and text in this field. It is the Caller ID for the called party when you make a VoIP call. If you register the VoIP Gateway to a SIP proxy
Страница 26 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration General Settings → SIP Proxy Server IP/Domain: Enter the IP address or URL (Uniform Resource Locator) of SIP proxy server or soft switch. Proxy Server Port: Enter the SIP proxy server’s listening port for the SIP in this field. Leave this field to
Страница 27 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration General Settings → SIP Outbound Proxy Support: Check the box to send all SIP packets to the destined outbound proxy server. An outbound proxy server handles SIP call signaling as a standard SIP proxy server would do. Further, it receives and
Страница 28 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-3-5 SIP Advanced General Settings → SIP Advanced Listen Port UDP: Enter the VoIP Gateway’s listening port in this field. Leave it as default settings, unless it conflicts with ports used by other device in your network. RTP Starting Port UDP:
Страница 29 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration General Settings → SIP Advanced Session Expiration: This field will set the time that the VoIP Gateway will allow a SIP session to remain die (without traffic) before dropping it. Session Refresh Request: Select UPDATE or re-INVITE to send refresh
Страница 30 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration General Settings → SIP Advanced Anonymous Caller ID (CLIR): Check the box to lock the delivery of the Caller ID to the called party. VoIP Call Out Notification: Check the box to enable the function of playing a tone to notify user that the call is
Страница 31 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration Compact Form: Check the box to represent common header field names in an abbreviated form. This may be useful when SIP message is too large to be carried on and recognized by the user agent. SIP Caller ID Obtaining: Select the part of the SIP
Страница 32 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-3-6 Phone Book Phone Book: It is used for peer-to-peer communication. Some peer information needs to be added to this section prior to making peer-to-peer calls. You need to enter the phone number and the IP address of the remote peer. General
Страница 33 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-3-7 Caller ID General Settings → Caller ID FXS Caller ID Generation: DTMF – Sending Caller ID in DTMF signaling. FSK – Sending Caller ID in FSK signaling. FSK + TypeII – Send Caller ID in FSK signaling. As the phone set supports Call Waiting
Страница 34 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-3-7-1 Hot Line General Settings → Hot Line Enable: Tick the check box to enable a line. If some lines are not used, disable them (Pause Function) to avoid unnecessary waiting when an incoming call is diverting to the line. Hot Line: Check to
Страница 35 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-3-7-2 Calling Features General Settings → Calling Features Do Not Disturb: Check the box to reject (busy tone played) incoming calls. Unconditional Forward: Check the box to forward incoming calls to the assigned “Forwarding Number”
Страница 36 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration Enable Call Feature Code Enable Call Feature Code: Check the box to enable the advanced function for Call Features, such as Call Pickup, Automatic Redial and Unattended transfer. Calling Feature Instructions: Call Hold: The call will be held after
Страница 37 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration Examples of establishing a Three-Way call: 1. 2. 3. 4. 5. 6. Phone1 dials to Phone2, Phone2 answers the call. Phone1 presses Flash then calls Phone3 (Phone2 is on hold) and Phone3 answers the call. Phone1 presses Flash to start the conference call.
Страница 38 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-3-8 NAT Traversal If your VoIP Gateway is set up behind an Internet sharing device, you can select either the NAT or STUN protocol. General Settings → NAT Traversal Enable(NAT Public IP): Check the box to use the IP address of the Internet
Страница 39 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-3-9 DDNS General Settings → DDNS Enable Dynamic DNS: Check the box to enable DDNS function. It is only necessary when the VoIP Gateway is set up behind an Internet sharing device that uses a dynamic IP address and does not support DDNS. Server
Страница 40 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-3-10 FAX General Settings → FAX Disable - Select it if you are not sending fax, but it is still accepted fax by the VoIP Gateway. T.38 Fax - Select it if you are using T.38 as the protocol for fax transmission. T.38 is used for reliable and
Страница 41 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration General Settings → FAX Enable High Quality: Check the box to increase approximately two times the bandwidth in order to compensate possible loss of packet during transmission and offers a better and reliable fax quality. FAX Codec: Select G.711
Страница 42 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-3-11 SNMP General Settings → SNMP Enable SNMP Agent: Check the box to enable the SNMP agent and fill the correct keys with SNMP server. D-Link Systems, Inc. 42
Страница 43 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-4 Advanced Settings 3-4-1 Codec setting Advanced Settings→ Codec settings Jitter Buffer: Enter the jitter of receiving packets. Silence Detection / Suppression: Check the box to enable the silence packets and send less voice data (package) during
Страница 44 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-4-2 Line settings Advanced Settings→ Line settings Listening Volume: Use the drop-down menu to adjust the hearing (listening) volume. Speaking Volume: Use the drop-down menu to adjust the speaking volume. Tone Volume: Use the drop-down menu to
Страница 45 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration Advanced Settings→ Line settings Ring (Early Media) Time Limit[10 - 600secs]: Enter the timeout to cancel a call if no one answers the phone. Enable End of Digit Tone: Check the box to activate the function of playing a “Beep-Beep” tone to notify
Страница 46 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration Advanced Settings→ Line settings FXS Impedance: Select different impedance from the drop-down menu. Advanced Settings→ Line settings This feature is a call drop standard for a VoIP Gateway to determine whether or not to hang up the phone. The VoIP
Страница 47 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration Advanced Settings → Line settings Hunting/Ring: It is used to set FXS group hunting mode. There are Hunting, Simultaneous Ring and Sequential Ring. Hunting: When someone calls in by dialing FXS representative number, the system will alaways assign
Страница 48 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-4-3 Digit Map Digit Map supports multiple dial plans which help users to arrange least cost route. Each Proxy Server has individual dial plan which combines the original feature of Digit Map and Speed Dial. You can use “?” or “%” in the column of
Страница 49 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration Methods of Digit Map: Method 1- Single mapping: Fill a short code into the Scan Code column, and enter the desired phone number into the VoIP Dial-out column. For example, Scan Code: 09 VoIP Dial-out: 0911888997 User Dial Length: 2 Route: VoIP VoIP
Страница 50 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration For example, Scan Code: 0% VoIP Dial-out: 1805% User Dial Length: Disable Route: VoIP VoIP Route Profile: Route # 3 Pick up the handset and dial 0423456789. The VoIP Gateway will dial 1805423456789 and go through Internet first and follow Route #
Страница 51 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-4-4 DoS Protection Advanced Settings → DoS Protection Enable DoS Prevention: Check the box to prevent DoS attacks from WAN. There are various types of DoS attacking. Leave settings in this field to the default if you are not familiar with it.
Страница 52 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-4-5 DTMF & PULSE Advanced Settings → DTMF & PULSE Dial Wait Timeout: Enter the timeout duration after the user picks up the phone set. Inter Digits Timeout: Enter the timeout duration between the intervals of each key pressed. When exceeding the
Страница 53 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-4-6 CPT / Cadence Advanced Settings → CPT / Cadence CPT # 1 Enable Setting 1: The CPT has a set of parameter table. Please adjust the CPT based on the local PSTN or PBX settings and requirements. D-Link Systems, Inc. 53
Страница 54 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration Advanced Settings → CPT / Cadence FXS Ring Cadence Settings: Specify the ring cadence for the FXS port. In this field, you specify the on and off pulses for the ring. The ring cadence that should be configured differs depending on local PSTN or PBX
Страница 55 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-4-7 Provision Settings Provisioning is a function that automatically updates your VoIP Gateway’s configuration by using a TFTP, FTP, or HTTP server located on the Internet. If you have access to such service, you will need to know the URL or IP
Страница 56 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration Connect Provision Server Periodically: Check the box to connect to Provisioning Server periodically. Auto Provision Interval: Enter the time for auto provisioning. Random Offset: Enter the offset of the time for auto provisioning. Provision Retry
Страница 57 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-4-8 Caller Filter This function allows you to accept or reject any incoming call from the IP address listed in the filter rule. The call from the IP address of SIP proxy server is always accepted, despite Deny is selected or the IP address of SIP
Страница 58 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-4-9 CDR Settings The user can set up a CDR Server to record call details for every phone call. Advanced Settings → CDR Send record to CDR Server: Tick the check box to enable the call detail recording. CDR Server IP / Domain: Enter the IP address
Страница 59 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-4-10 Static Route Build static routes within an internal network. These routes will not apply to the Internet. Advanced Settings → Static Route Route: Destination network of the route. Route Mask: Subnet mask to apply on destination network. Next
Страница 60 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-5 Tools 3-5-1 Ping Test Use “Ping” to verify if a remote peer is reachable. Enter a remote IP address and click “Test” to ping the remote host. The result would be shown on Result Table Tool → Diagnostics D-Link Systems, Inc. 60
Страница 61 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-5-2 STUN Inquiry Use “STUN Inquiry” to detect your IP sharing device’s NAT type and communication between a STUN server and client. Tool → STUN Inquiry NAT Type: It shows the NAT type of your router. STUN Server IP/Domain: Enter the IP address or
Страница 62 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-6 System Settings 3-6-1 NTP System settings → NTP Automatically synchronize with Internet time servers: The VoIP Gateway should automatically sync up with time servers. First NTP time server: Select the desired domain name of a NTP server as
Страница 63 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-6-2 Login Account System settings → Login Account Note: There are two operating levels when entering the Web UI. Logging-in as the ADMIN allows you to change all settings. A Web UI USER only has access to some settings. Password: It is highly
Страница 64 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-6-3 Backup / Restore Backup Configurations File System settings → Backup and Restore The current system settings can be saved as a file onto the local hard drive. Click the Backup Settings button to save your current settings to a file. Click the
Страница 65 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-6-4 System Log System settings → System log Enable: Check the box to send event notification messages across IP networks to the Server. Server Address: Enter the System Log Server’s IP address. Port: Enter the System Log Server’s listening port.
Страница 66 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 3-6-6 Software Upgrade The VoIP Gateway supports a software upgrade function from a remote server. Please consult your VoIP Service Provider for information about the following details. System settings → Software upgrade Upgrade Server: Select the
Страница 67 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 4. Configuring the VoIP Gateway through IVR Preparation 1. Connect the power supply, telephone set, telephone cable, and network cable properly. 2. If a static IP is provided, confirm the correct IP settings of the WAN Port (IP address, Subnet
Страница 68 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration Save Settings When all setting procedures are completed, dial 509 (Save Settings) from phone keypad. Wait for about three seconds, you should hear a voice prompt “1 (one).” You can now hang up the phone and please reboot the VoIP Gateway to enable
Страница 69 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 4-2 IP Configuration Settings—Set the IP Configuration of the WAN Port Static IP Settings Note: Complete static IP settings should include a static IP (option 1 under 114), IP address (111), Subnet Mask (112), and Default Gateway (113). Please
Страница 70 из 75 DVG-2024S User’s Manual VoIP Gateway Configuration 4-2-1 Character Conversion Table: The table below provides a list of conversion codes. The first row (high-lighted) of each pair of the column lists the numbers, alphabets or symbols and the second row (high-lighted) of each pair of the column
Страница 71 из 75 DVG-2024S User’s Manual Dialing Principles 5. Dialing Principles 5-1 Dialing Options Dial the phone number which you want to call and press # to call out immediately. Note that if the “# (pound)” not dialed, the number will be called out after 4 seconds by default. The period between number dialed
Страница 72 из 75 DVG-2024S User’s Manual Dialing Principles Start Enter a phone number (D#) Dial the number defined in Speed Dial table Yes Is (D#) defined in Speed Dial table? No Is (D#) defined in Extension table? Yes No Is (D#) defined in Phone Book table? Yes No Is (D#) defined in Phone Book Manager? Yes No Is
Страница 73 из 75 DVG-2024S User’s Manual Appendix Appendix Product Features WAN • One 10/100Mbps auto-negotiation, auto-crossover RJ-45 Ethernet port • Support static IP, PPPoE and DHCP address assignment and dynamic DNS (DDNS) • QoS: IP TOS (Type of Services) and DiffServ (Differentiated Services) for both SIP
Страница 74 из 75 DVG-2024S User’s Manual Appendix Configuration & Maintenance • Configuration methods: o Web o IVR o Telnet • Status reports: o Port status o Registration status o Ping tests o STUN status o Hardware / software information • Firmware Upgrade through TFTP, FTP and HTTP server • Configuration
