Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
TR151-SP
Smart Pallet Tracker
User Manual
Version
1.0
Страница: (1 из 37)
навигация
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Оглавление инструкции
Страница 1 из 38 TR151-SP Smart Pallet Tracker User Manual Version 1.0
Страница 2 из 38 Table of Content 1. Introduction and Features.............................................................................................. 3 1.1 Introduction ............................................................................................................. 3 1.2
Страница 3 из 38 1. Introduction and Features 1.1 Introduction TR151-SP is a durable and water resistant GPS/GSM/GPRS tracker. Users can install TR151-SP on vehicles or assets for tracking. It can send out SMS with its location (longitude and latitude) to user’s cell phone by GSM network or to personal computer by
Страница 4 из 38 1.3 Hardware GSM module: Operating temperature: Charging temperature Antenna Type: Dimension: MC55i GSM 850/900/1800/1900 -20° to 55° C 0° to 45° C GPS patch antenna 128x105x68 mm, for rectangular part 128x130x68 mm, including reset/USB extrusion part Battery: Interface: Button: 15 A rechargeable
Страница 5 из 38 2. Start-up 2.1 Accessories TR151-SP AC charger USB Cable TR151-SP page 5
Страница 6 из 38 2.2 Install SIM card 1. Remove all 4 screws from the bottom of the device. 2. Carefully, pull both sides apart. This will reveal the insides of the TR151-SP. TR151-SP 格式化: 項目符號及編號 page 6
Страница 7 из 38 格式化: 項目符號及編號 3. Inside, you’ll find a battery, a TR151-SP, a USB extension cable and a reset button. 4. Carefully, unplug the battery from the TR151-SP and the reset button. 5. 6. 7. Unplug the TR151-SP from the USB extension and remove the TR151-SP from the casing. Open the SIM holder. Install the
Страница 8 из 38 10. Screw in the four screws and you’re done. TR151-SP page 8
Страница 9 из 38 2.3 How to Turn on/ Charge/ Reset Device is always on until battery exhausted. Charging: Before using TR151-SP for the first time, please fully charge it by connecting to AC power adapter for at least 23 hours (The attached battery is specially designed for TR151-SP.) Reset: Reset button: Pressing
Страница 10 из 38 4. Operating the TR151-SP 4.1 How to set TR151-SP to immediately report its position? Users can make TR151-SP to do SMS or/ and GPRS immediate report of its location by the command media of SMS or GPRS. . The command is following as: SMS Command Media for Immediate Report SMS Report Media
Страница 11 из 38 NOTE: 1. The coordinate unit of report format 0 is degree. The coordinates unit of report format 1 is degree and minute with a 4-digit decimal fraction 2. If TR151-SP can not get fixed the position within the “Maximum GPS Fixing Time”, it will 3. return the previous location. Please refer “How to
Страница 12 из 38 4.2 How to set TR151-SP to periodically report its position? Users can make TR151-SP to do SMS or/ and GPRS periodic report of its location by the command media of SMS or GPRS. . The format of command is following as: SMS Command Media for Periodic Report SMS Report Media
Страница 13 из 38 send the SMS of ?2,IMEI,Return_Phone_Number! to stop the periodical report. 3. For the command of “?9,IMEI,Report_Interval,Return_Phone_Number!” and “$9,IMEI,Report_interval!”, TR151-SP would keep connected to GPRS server after it sends the location data. 4. For the command of
Страница 14 из 38 4.3 How to set TR151-SP to make GPRS period and disconnect report? Users can make TR151-SP to make GPRS periodic and disconnect report by the command media of SMS or GPRS. What’s different from GPRS periodic report is that for GPRS disconnect and period report, TR151-SP would disconnect from GPRS
Страница 15 из 38 You have to enter “?10,355632000166323,120,6261234567! Example 2: Require 180-sec period report sent to 626123456 by GPRS command media $10,355632000166323,180! Stop GPRS disconnect and periodical report: Users can send an SMS to stop periodical report. The format of SMS is following as:
Страница 16 из 38 4.4 How to set TR151-SP enter Geo-fence mode? Users can set up to 10 permissible or restricted areas whose shape is circular or rectangular for TR151-SP to track the vehicles or monitor the equipment/assets. The command media could be SMS or GPRS. Users can choose to receive alarm message while
Страница 17 из 38 out the permissible areas. Report_Interval Time interval of sending data report. The unit is second. Set how many reports will be sent? Number_of_Reports=0 continuous report Number_of_Reports=X Number_of_Reports X times report Report_Format Set TR151-SP to return message by Format0 or Format1. (see
Страница 18 из 38 Command 3: ?4,IMEI,C,longitude,latitude,radius,In_or_Out,Report_Interval, Number_of_Reports,Report_Format,Return_Phone_Number! If user uses numerous SMS in one setting, the IMEI, In_or_Out, Report_Interval, Number_of_Reports, Report_Format, Return_Phone_Number must be the same between each SMS. If
Страница 19 из 38 SMS2: ?4,355632000166323,C,E12228.1883,N2442.8117,1000,out,120,10,1,616123456! SMS3: ?4,355632000166323,C,E12328.1883,N2542.8117,1500,out,120,10,1,616123456! Exit Geo-fence mode: Users can send an SMS exit Geo-fence mode. The format of SMS is following as: ?2,IMEI,Return_Phone_Number! Users can
Страница 20 из 38 4.5 How to set TR151-SP enter motion mode? You could send command to ask TR151-SP to enter motion mode by SMS command media or GPRS command media. Under motion mode, in addition to the static report interval, TR151-SP will send out the motion report when it senses vibration. If you’d like to
Страница 21 из 38 “?IMEI,17,GPS_Fix,Date,Time,Longitude,Latitude,Altitude,Speed,Heading,Number_of_Satellite s_In_Use,HDOP!”. (For details of the data, please refer to SMS Report Format) When TR151-SP senses vibration over the value of the sensitivity for the first time, it will send the motion report like
Страница 22 из 38 You can send command as: “$16,355632000166323,3,60,90,10,9095978525! TR151-SP will send “$OK!” to the GPRS server TR151-SP will send regular report every 60 minute to GPRS server and 909-597-8525 like “$,355632000166323,17,3,301008,125935,E12129.2616,N2459.7918,97.2,0.13,142.31,04,2.4! When
Страница 23 из 38 5 Configuration 5.1 Read Configuration 5.1.1 How to send SMS and ask TR151-SP for sending back its configuration by SMS? You can send SMS to TR151-SP to ask it to send SMS with its configuration setting. The format of the SMS is “?7,IMEI,0,Return_Phone_Number!” Format Description ? Start sign 7
Страница 24 из 38 configuration setting. The format of the SMS is “$7,IMEI,0,Return_Phone_Number!” Format Description $ Start sign 7 Function code IMEI IMEI code of the TR151-SP 0 Report type of reading configuration Report Phone Number The phone number for receiving TR151-SP configuration. ! End sign TR151-SP will
Страница 25 из 38 5.2 Write Configuration 5.2.1 How to configure TR151-SP by SMS? You can send SMS to configure following parameters into TR151-SP. There are 9 settings as below. SMS Default Report Phone Number Maximum GPS Fixing Time Default Report Mode Setting SOS Numbers Motion setting GPRS setting Normal Setting
Страница 26 из 38 SMS Default Report Phone Number: Set SMS Default Report Phone Number. Maximum_GPS_Fixing_Time: If GPS is not fixed within the time, it returns previous location and close GPS. The unit is minute. Parameter value range: 3~10 minutes, default value : 5 minutes Default_Report_Mode: Default_Report_Mode
Страница 27 из 38 3. GPRS Server Host Name is the physical IP address of the PC that you installed the call center or a domain name. The IP is for connecting the GPRS network. It should be a physical IP. 4. In Taiwan, GPRS user name, GPRS user password, GPRS DNS1, and GPRS DNS2 are not necessary items. You have to
Страница 28 из 38 5.2.2 How to configure TR151-SP by GPRS server? You can send command by GPRS server to configure following parameters into TR151-SP. There are 9 settings as below. SMS Default Report Phone Number Maximum GPS Fixing Time Default Report Mode Setting SOS Numbers Motion setting GPRS setting Normal
Страница 29 из 38 Default_Report_Mode = 22 SMS and GPRS period report Enable_SMS_Default_Report_Phone_Number: Enable or disable SMS Default Report Phone Number. Enable_SMSDefaultReturnPhoneNumber = 0 Disable Enable_SMSDefaultReturnPhoneNumber = 1 Enable Number_of_Reports: Set how many report will be sent.
Страница 30 из 38 On-line Setting: Enable/disable_GPRS_on-line: 0=disable 1=enable Enable/disable_GPRS_on-line in motion mode (the report method must be GPRS) Disconnect and reconnect interval: interval for cutting GPRS connection and re-connect it. The unit is second. Cell ID: Enable/disable_Cell ID: 0=disable
Страница 31 из 38 5.3 TR151-SP Configuration Content Example: TR,IMEI,1,1,3,30,1,30,0,12,30,0,Tony,+8.00,1,60,1,0,0,1,0,1,1800! Parameters Description TR Start sign IMEI IMEI 1 Sequence Enable/ Disable SMS Default 0: Disable, 1: Enable Report Phone Number Maximum GPS Fixing Time The maximum time for getting GPS fix.
Страница 32 из 38 Example: TR,IMEI,2,18883238720,19095978525,19095973805,19095973058,18883238730,19095973179,19095973179! Parameter Description TR Start sign IMEI IMEI 2 Sequence SOS Number 1 Set SOS Number 1 SOS Number 2 Set SOS Number 2 SOS Number 3 Set SOS Number 3 Default Report Number Report phone number SMS
Страница 33 из 38 6 Report Format 6.1 SMS Report format SMS Report format from TR151-SP The data format is configurable in the SMS tracking commands. There are two types of the data format as below. Format0 is for general end users who send SMS commands to TR151-SP by their cell phone or PDA phone. This format is
Страница 34 из 38 date ddmmyy time hhmmss longitude (E or W)dddmm.mmmm Example: E12129.2186 → E (N or S)ddmm.mmmm Example: N2459.8915 →N 121°29.2186’ latitude 24°59.8915’ altitude xxxxx.x unit: meters speed xxxxx.xx unit: knots (1knots = 1.852km) heading ddd number of satellites in use xx HDOP xx Command END !
Страница 35 из 38 6.2 GPRS Report Format Format of report GPRS from TR151-SP Format: Command_Head,IMEI,status,GPS_fix,date,time,longitude,latitude,altitude,speed,heading,number of satellites in use,HDOP,Command_End Example: $355632004245866,1,1,040202,093633,E12129.2252,N2459.8891,00161,0.0100,147,07,2.4! Format
Страница 36 из 38 6.3 Cell ID Report Format Format of GPRS report with Cell ID from TR151-SP GSM Cell ID is assisted information to get device location. When TR151-SP does not get GPS fix, you could enable TR151-SP to report the Cell ID. Note: If you want TR151-SP to report the Cell ID, please configure TR151-SP by
Страница 37 из 38 date ddmmyy time hhmmss MCC Mobile Country Code 3 digits MNC Mobile Network Code 2 or 3 digits LAC Location Area Code 4 hexadecimal digits CID Cell identifier 4 hexadecimal digits BSIC Base Station Identity Code 1 digit or 2 digits RSSI Received Signal Strength Indicator 1 digit or 2 digits Command
