OPS Slot-In PC

Quick Start Guide

1.  Release screw

4.  Line Out

7.  USB 3.0 ports

10. HDD LED

2.  Antenna connector/cover

5.  USB 2.0 port

8.  LAN (RJ-45) port

11. Power LED

3.  Mic In

6.  DisplayPort connector

9.  Power button

12. Reset button

1. 

Turn off or unplug your display, projector, or standalone adapter.

2. 

Install your Slot-In PC to the OPS slot or dual slot adapter on your 

display. For more details, refer to the section 

Installing your Slot-In 

PC

.

3. 

Turn on or plug your display. Your Slot-In PC will automatically turn 

on.

NOTES:

•  Your Slot-In PC complies with Intel

®

 OPS (Open Pluggable 

Specification) Standard.

•  Some displays may require the use of a dual slot adapter. Refer to the 

documentation that came your display to check if you need to use a 

dual slot adapter on your Slot-In PC.

•  It is normal that the fans on both your Slot-In PC and your display may 

not work when the temperatures or the CPU workload is low.

•  Your Slot-In PC may include a Wi-Fi antenna. Install the Wi-Fi antenna 

on your Slot-In PC after setting up your Slot-In PC with your display.

• 

The combined maximum ambient temperature for your Slot-In 

PC and your display should be 35oC. A combined maximum 

temperature higher than 35oC can cause damage and may reduce 

the lifespan of both devices.

• 

Some parts of your Slot-In PC may become hot, so ensure that your 

Slot-In PC has cooled down before removing it to avoid the risk of 

burns.

• 

Do not open the chassis of your Slot-In PC as this will void its 

warranty. If you require an upgrade or service, please contact your 

local NEC Technical Support.

• 

Regularly clean your Slot-In PC and your display. You can use a 

brush to remove the dust from the fan and heat pipes of your Slot-In 

PC. 

• 

Your Slot-In PC comes with a Solid State Disk (SSD). Do not use 

a defragmentation program as this can damage the SSD and may 

reduce the SSD performance.

• 

Use your Slot-In PC according to the instructions on the manual and 

other documentation that came with your Slot-In PC.

• 

Follow all safety and usage instructions on installation, 

maintenance, and transport/warehousing.

• 

Do not block the air vents and do not use your Slot-In PC in an 

extreme environment where high temperature or high humidity 

exists.

• 

Do not insert any metallic objects or other objects into your Slot-In 

PC. 

Safety Instructions

Setting up your Slot-In PC

Getting to know your Slot-In PC

E9999_NPS-002_QSG.indd   1

12/10/2014   5:59:19 PM