N.C. Madsensvej 1 6920 Videbæk Denmark Phone: +45 6040 5200 www.scan-speak.dk
TWEETER
D3004/602010
The compact size is one of the key elements of these Illuminator tweeters, which
provides a high degree of flexibility within design options. The small size is employed
without compromising sound quality where these compact tweeters are fully
comparable to the renowned full size Illuminator and Revelator tweeters, no matter if
the music is played at high or low listening levels.
KEY FEATURES:
1" Textile Dome Diamphragm
Patented Symmetrical Drive (SD-2) motor
Large Non Resonant Alu Rear Chamber
Large Roll Surround f. Wide Dispersion
Sound Transparant Protective Grill
Die Cast Housing & Face Plate
Notes:
IEC specs. refer to IEC 60268-5 third edition.
All Scan-Speak products are RoHS compliant.
Data are subject to change without notice.
Datasheet updated: February 22, 2011.
T-S Parameters
Resonance frequency [fs]
425 Hz
Mechanical Q factor [Qms]
2.50
Electrical Q factor [Qes]
0.97
Total Q factor [Qts]
0.70
Force factor [Bl]
1.7 Tm
Mechanical resistance [Rms]
0.4 kg/s
Moving mass [Mms]
0.35 g
Suspension compliance [Cms]
0.40 mm/N
Effective diaph. diameter [D]
30 mm
Effective piston area [Sd]
7 cm²
Equivalent volume [Vas]
0.03 l
Sensitivity (2.83V/1m)
89.6 dB
Ratio Bl/√Re
0.98 N/√W
Ratio fs/Qts
608 Hz
Electrical Data
Nominal impedance [Zn]
4 Ω
Minimum impedance [Zmin]
3.6 Ω
Maximum impedance [Zo]
10.7 Ω
DC resistance [Re]
3 Ω
Voice coil inductance [Le]
0.02 mH
Power Handling
100h RMS noise test (IEC 17.1)*
50 W
Long-term max power (IEC 17.3)*
130 W
*Filter: 2. order HP Butterworth, 2.5 kHz
Voice Coil and Magnet Data
Voice coil diameter
26 mm
Voice coil height
2.1 mm
Voice coil layers
2
Height of gap
2.5 mm
Linear excursion
± 0.2 mm
Max mech. excursion
± 1.6 mm
Unit weight
0.2 kg
