FEATURES:
•
12/24 Hour time display selectable.
•
Temperature in °C/°F selectable.
•
Calendar display up to Year 2050.
•
Week count display.
•
Snooze Alarm function.
SET UP:
•
Remove the insulator (8).
•
2 x AA batteries inserted.
•
Press "RESET" (7) hole on the back of the unit with a
pin.
MANUAL TIME SETTING
•
Hold MODE (3) button until Hour digit flashes.
•
Press "+" (6) or " " (5) to adjust Hour, Minute,
Second, Year, Month, Date, and Time Zone.
•
Press MODE (3) button to confirm each setting.
Note: Second can only be adjusted to zero only.
DAILY ALARM SETTING:
•
Press MODE (3) button once to select Alarm Time
Display. Icon "AL" appears on the LCD (2).
•
Hold MODE (3) button for 3 seconds and press "+"
(6) or " " (5) buttons to adjust the alarm time.
•
Press MODE (3) button to confirm each setting.
•
Press "ALARM" (4) button to switch the alarm on or
off.
"
<<•>>
" will appear on the LCD if the alarm is on.
SNOOZE ALARM FUNCTION:
•
Press SNOOZE button (1) when alarming. The alarm
snoozes for 5 minutes, then it alarms again.
•
Simply press other buttons to stop snooze alarm.
THERMOMETER:
•
Press " " (5) button to select the temperature to be
displayed in °C/°F.
12/24 HOUR FORMAT:
•
Press "+" (6) to select hour to be displayed in 12
hour or 24 hour format.
NOTES/REMARKS:
•
All function keys do not work when the radio signal
is being scanned.
•
Avoid placing the clock near interference
sources/metal frames such as computer monitor or
TV sets.
•
Placing the clock closer to a window/towards the
general direction of the Transmitter. The signal is
weaker in basement.
•
Never use the clock in bathroom or any other area
with high humidity.
•
The operating temperature of the clock is 0° 60°.
•
The clock loses its time information when the bat
tery is removed.
SERVICE LIFE OF THE LCD ALARM CLOCK WITH
CALENDAR NOT LESS THAN 3 YEARS
3532.qxd 29.10.03 12:29 Page 1
