Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
P964 APR 964
Cable Router with 11g AP
Quick Installation Guide
VER. 1.0
Страница: (1 из 6)
навигация
1
2
3
4
5
6
Оглавление инструкции
Страница 1 из 7 P964 APR 964 Cable Router with 11g AP Quick Installation Guide VER. 1.0
Страница 2 из 7 Rear Panel Connections PORT CONNECTION CABLE Connect the F-type connector to the CATV outlet using a coaxial cable. POWER Connect the external power adaptor to the P964 APR and plug it into an appropriate power outlet. TO a COMPUTER TO a HUB LAN1~LAN4 Straight-through/Crossover Ethernet cable
Страница 3 из 7 Preparing Your Network 1. Your computer must have a 10M or 100M NIC (Network Interface Card), USB interface or IEEE 802.11g/11b compatible client. 2. If using USB connection, you have to install the USB driver. Insert the supporting CD into the CD-ROM drive before you connect the USB port of P964
Страница 4 из 7 Verifying TCP/IP Properties 1. Click Start and then Run. In the Run window, type "winipcfg" and then click OK to open the IP Configuration window. 2. Select your network adapter. You should see your computer's IP address, subnet mask and default gateway. Setting up Your Windows NT/2000/XP Computer
Страница 5 из 7 Setting up Your Macintosh Computer Configuring TCP/IP Properties 1. Click the Apple menu, Control Panel and double-click TCP/IP to open the TCP/IP Control Panel. 2. Select Ethernet from the Connect via list. 3. Select Using DHCP Server from the Configure list. 4. Close the TCP/IP Control Panel. 5.
Страница 6 из 7 Troubleshooting Before performing troubleshooting, make sure both the P964 APR’s power (PWR) LED and the system status (SYS) LED are on. PROBLEM The PWR LED is off. CORRECTIVE ACTION Make sure that the P964 APR’s power adaptor is connected to the P964 APR and plugged in to an appropriate power
