Инструкция для ABUS TVIP52502 Operating instructions

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

10.3.2.5 UPnP™

The UPnP (Universal Plug and Play) function makes it easy to control network devices in an IP network.
This allows the network camera to be seen in the Windows network environment (e.g. as a network
device).

Enable UPnP

For enabling or disabling the UPnP function.

Friendly Name

Display of the MAC address of the camera

Port Mapping

Enable Port Mapping

This enables Universal Plug and Play port forwarding for network services. If your router supports UPnP,
then port forwarding for video streams is activated automatically on the router for the network camera
using this option.

Port Mapping Mode

Select here whether you wish to conduct port mapping automatically or manually.
You can choose between “Auto” and “Manual”.

Protocol Name

HTTP

The standard port for HTTP transmission is 80. As an alternative, this port can be assigned a value in the
range of 1025 ~ 65535. If several IP cameras are located on the same subnetwork, then each camera
should have its own unique HTTP port.

RTSP

The standard port for RTSP transmission is 554. As an alternative, this port can be assigned a value in the
range of 1025 ~ 65535. If several IP cameras are located in the same subnetwork, then each camera
should have its own unique RTSP port.

SDK (control port)

The standard port for SDK transmission is 8000. Communication port for internal data. As an alternative,
this port can be assigned a value in the range of 1025 ~ 65535. If several IP cameras are located in the
same subnetwork, then each camera should have its own unique SDK port.

External Port

You can only change ports manually here of the “Port Mapping Mode” was set to manual.

Status

Displays whether the external port entered is valid or invalid.