9
SM2712
CONTROL PANEL
GB
EASY LOGIC: The EASY LOGIC system automatically regulates the wash time and water and power
consumption according to the actual amount of washing placed in the drum. The ½ load function
is therefore redundant in that the EASY LOGIC system automatically sets the wash parameters.
EASY IRON: Press button G to select the Easy Iron option. The washing machine will
regulate the wash parameters to reduce the formation of creases and make ironing
easier. The spin speed is set automatically at 500 rpm.
START: During the phase for selecting programs and washing options, the start LED
stays off. To confi rm the selections and start the wash cycle, press “Start” button H.
The LED will light up.
TECHNICAL CHARACTERISTICS
Width (cm)
Height (cm)
Depth (cm)
MODEL:
Dimensions
Max. spin speed (rpm)
Water pressure
Electrical connection
Max. load
see rating plate
FLN
149L
W/B/A
59.5
85.0
59.0
1400
9.0
FLN
129L
W/B/A
FLN
168
W/B/A
FLN
128L
W/B/A
FLN
108L
W/B/A
FLN
147L
W/B/A
FLN
127L
W/B/A
FLN
126L
W/B/A
FLN
106L
W/B/A
FLN
105L
W/B/A
FLSN
105L
W/B/A
FLSN
125L
W/B/A
FLSN
103L
W/B/A
59.5
85.0
55.0
1000
5.0
59.5
85.0
39.0
1200
5.0
59.5
85.0
39.0
1000
5.0
59.5
85.0
55.0
1200
6.0
59.5
85.0
55.0
1000
6.0
59.5
85.0
55.0
1400
7.0
59.5
85.0
55.0
1200
7.0
59.5
85.0
59.0
1200
9.0
59.5
85.0
59.0
1600
8.0
59.5
85.0
59.0
1200
8.0
59.5
85.0
59.0
1000
8.0
59.5
85.0
33.0
1000
3.5
AUTOCLEAN: Frequent washes at low temperatures can lead to the formation of mould and create
bad smells inside the washing machine. The AUTOCLEAN function thoroughly cleans the washing
machine by means of a special 90°C cycle.
AUTOCLEAN will automatically suggest starting the cleaning programme after a certain number of
washes, if no hot washes have been carried out during this time. This it does by means of a fl ashing
on the display.
Remove all the washing from the drum, place knob I in position Autoclean, and press Start button
H to start the cycle.
The AUTOCLEAN programme can be effected at any time or when circumstances require it. Remove
the washing in the drum and close the door. Place knob I in position Autoclean, keeping button
pressed until
appears on the display. To start the AUTOCLEAN cycle, press the Start button H