![background image](/i/assistant/156781/assistant-ap-100m/h/assistant-ap-100m-029.png)
ENG
р.
4
Y O U R S U C C E S S I S O U R C O N C E R N !
To turn on the Tablet, press and hold the [Power] key on the right side of
Tablet
for a while
.
You will be guided to Home screen
.
Press and drag the slider to unlock the unit.
When the Tablet is on, to shut off the Tablet,press and hold the [Power] key until
the
Device options
dialog appears
with a request
Would you like to shut
-
down?
Select
OK
Press [Power] button to enter standby mode and
device will lock automatically
.
Locking the device turns off the display to save your battery and to prevent unin
-
tended operation of the device
.
To wake up the device, press [Power] again and
drag the slider.
•
You need to charge the device prior to use it for the first time or when battery
power is low
.
• Charge the device using
the supplied AC/DC adapter with output 5 V.
• Please turn the device to standby mode to shorten the charging process
•
Using device for the first three times, charge it for at least 4 h when the power
runs out completely
.
•
When power cable is connected to the device for charging, the device will enter
nto standby mode after remains idle for 60s
.
Press the button [Power] to wake up
the device.
•
The battery status is displayed at the status bar.
When the battery level becomes too low, a prompt comes up to note you to
charge the Table
t.
It may take 4-
5
hours for
charg
e.
full
Note: Sometimes 100% charging may not show up, even the tablet has been charged for a very long time
(more than
5
hours)
.
The battery is actually full, but the charging info is delayed
. I
n this case you may
unplug the power cable
.
POWER ON AND OFF THE TABLET PC
CHARGING THE TABLET PC
STANDBY / SLEEP MODE
Full Battery
Charging Battery
Low Battery
ENG
to confirm
.