7

THUNDERBIRD BX108 User Manual

1.2.2  Rear panel

MUSIC Group Macao Commercial

          Offshore Limited 

(7)

(8)

(9)

(12)

(10) (11)

Fig. 1.2: Rear panel connectors

(7) 

FUSE HOLDER / VOLTAGE SELECTOR

. Please make sure that 

your local voltage matches the voltage indicated on the unit, 
before you attempt to connect and operate the BX108. 
Blown fuses may only be replaced by fuses of the same type 
and rating. Some models allow for inserting the fuse holder 
in two different positions, in order to switch over from 230-V 
to 115-V operation, and vice versa. Please note that for 115-V 
operation outside Europe, you need to use a fuse of a higher 
rating (see chapter 1.1).

(8) 

Use the enclosed power cord to connect the unit to the mains.

(9) 

The stereo 1/4" 

PHONES

 jack allows you to monitor the BX108’s 

audio signal with a pair of commercially available headphones. 
Connecting the headphones will mute the built-in speaker.

(10) 

The 

TAPE OUT

 cinch connector supplies the audio signal of your 

BX108, for example to send it to a recording machine.

(11) 

The 

TAPE IN

 cinch connector allows you to connect an external 

signal source such as a drum computer or other machine 
providing audio playbacks.

(12) 

SERIAL NUMBER

. Please take the time to have the warranty 

card filled out completely, and return it within 14 days after 
the date of purchase, so as to be entitled to benefit from our 
extended warranty. Or use our online registration option 
available on the World Wide Web at behringer.com.

2.  Installation

2.1  Mains connection

The mains connection is made by using the enclosed power cord and 
a standard IEC receptacle. It meets all of the international safety 
certification requirements.

2.2  Audio connections

The input of your THUNDERBIRD BX108 is on a mono 1/4" jack, 
the PHONES output on a stereo 1/4" jack. The tape inputs/outputs are 
on cinch connectors.

◊ 

Please ensure that only qualified personnel install and 
operate the BX108. During installation and operation 
the user must have sufficient electrical contact to earth. 
Electrostatic charges might affect the operation of the 
THUNDERBIRD BX108.