Maintenance

40

Step 7. Reset the lamp counter  

i. Press and hold Exit on the projector 
for 3 seconds to display the total used 
lamp time.

ii. Press Menu on the projector or on 
the remote control to access the lamp 
hour timer. An adjustment message 
will appear.

iii. Press 

W

 or 

X

 to reset lamp hours 

and press EXIT to leave.

Temp Warning Light

When the Temperature warning light is on, it is warning you of the following possible prob-
lems:

1.

The internal temperature is too high.

2.

Air Filters are clogged.

3.

The fans are not working.

Turn the projector off , check that the air filters are clean. If the problem persists, contact 
qualified service personnel for further help.

For more detailed information, please refer to the following section.

Indicators

Illustration - table legend.

1.

Blank -

 : Light OFF

2.

 : Light flashing

3.

 : Light ON

4.

O

 : Orange light

5.

R

 : Red light

6.

G

 : Green light