WL-5
MOUNTING INFORMATION
TECHNICAL SPECIFICATIONS
MATERIALS
Throat diameter
Rated impedance
Minimum impedance
D.C. Resistance
Power capacity *
Program power
Sensitivity **
Frequency range
Recommended crossover
Voice coil diameter
Magnetic assembly weight
Flux density
BL factor
36 mm. 1.4 in.
8 ohms.
7.2 ohms. @ 3 kHz
5.5 ohms.
70 w AES above 1 kHz
140 w above 1 kHz
108 dB 1 w @ 1m
coupled to TD-385 horn
0.6 - 20 kHz
800 Hz or higher (12 dB/oct. min.)
72.2 mm. 2.87 in.
2.1 kg. 4.62 lb.
2 T
11 N/A
Overall diameter
Depth
Mounting
Net weight
(1 unit)
Shipping weight
(2 units)
123 mm. 4.84 in.
271 mm. 10.67 in.
Four 7.5 mm. diameter holes
2.62 kg. 5.76 lb.
5.65 kg. 12.43 lb.
•
Waveguide:
synthetic resin.
•
Driver diaphragm:
titanium.
•
Driver voice coil:
edgewound aluminium ribbon wire.
•
Driver voice coil former:
kapton.
•
Driver magnet:
neodymium.
WL-5
DIMENSION DRAWINGS
Notes:
*The power capacity is determined according to AES2-1984 (r2003) standard.
Program power is defined as the transducer’s ability to handle normal music program material.
**Sensitivity was measured at 1 m distance, on axis, with 1 w input, averaged in the range 1-7 kHz.
LINE ARRAY DRIVER
Polígono Industrial Moncada II
·
C/. Pont Sec, 1c
·
46113 MONCADA - Valencia (Spain)
·
Tel. ( 34 ) 96 130 13 75
·
Fax ( 34 ) 96 130 15 07
·
http://www.beyma.com
·
E-mail: beyma@beyma.com
·