![background image](/i/bosch/167849/bosch-bgl-452125/h/bosch-bgl-452125-011.png)
9
en
Disposal information
Packaging
The packaging is designed to protect the vacuum
cleaner from being damaged during transportation. It is
made of environmentally friendly materials and can be
recycled.
Dispose of packaging that is no longer required at an
appropriate recycling point.
Used vacuum cleaners
Used vacuum cleaners still contain many valuable
materials. Therefore, please take your used vacuum
cleaner to your retailer or recycling centre to be
recycled. For current disposal methods, please enquire
at your retailer or your local council.
Disposal of filters and dust bags
Filters and dust bags are made from environmentally
friendly materials.
As long as they do not contain substances that are not
permitted to be disposed of in the household rubbish,
you can dispose of them with your normal household
rubbish.
!
Please note
The mains socket must be protected by at least a 16
amp fuse.
If a fuse should blow when you switch on the appliance,
this may be because other electrical appliances which
have a high current draw are connected to the same
power circuit.
To prevent the fuse from blowing, select the lowest
power setting before switching the appliance on, and
increase the power only once it
is running.
Fold out picture pages.
Before using for the first time
Figure
Push the handle onto the flexible hose until it engages.
Setting up
Figure
a)
Push the flexible hose adapter into the opening on the
vacuum cleaner until it engages.
b
To remove the flexible hose, press the release button and
pull the hose out.
Figure
a)
Connect the handle and the telescopic tube together.
b)
Push the handle into the telescopic tube until it engages.
To release the connection, squeeze the locking collar and
pull the telescopic tube out.
Figure
a)
Connect the floor tool and the telescopic tube together.
b)
Push the telescopic tube straight into the
connecting piece of the floor tool until it
engages.
To release the connection, squeeze the locking collar
and pull the telescopic tube out.
Figure
To adjust the length of the telescopic tube, adjust the
adjusting sleeve/sliding switch in the direction of the
arrow and adjust the tube to the required length.
Figure
Attach the accessories holder to the multi-purpose
nozzle and clip it onto the suction pipe/telescopic tube.
Figure
Take the mains plug, pull the mains cable to the required
length and insert the plug into a socket.
Figure
Press the ON/OFF button in the direction of the arrow to
switch your vacuum cleaner on.
8
7
6*
5*
4*
3*
2
1*