![background image](/i/bosch/163303/bosch-bsgl-52130/h/bosch-bsgl-52130-010.png)
9
Changingthefilter
!
Pl
ease note
:
Alw
ays switch off the appliance before
changing the
fil
ter.
Replacingthedustbag
Figure
a)
If
the dust bag change indicator lights up red
continuously when the
floo
r tool is lifted from the
floo
r and the highest power setting has been
selected, the dust bag must be changed, even
though it may not yet be full.
Ev
en if the dust bag is
not full, it may still need changing, due to the type of
dust which has been vacuumed.
F
irst check that the nozzle, suction pipe and
fl
e
x
ible
hose are not blocked, as this would also lead to the
dust bag change indicator being triggered.
b)
Th
e handle can easily be detached from the hose to
remove blockages.
Figure
Openingthelid
●
Op
en the lid by moving the locking lever in the
direction of the arrow.
Figure
a)
S
eal the dust bag by pulling the sealing tab, and
remove the bag.
b)
I
nsert the new dust bag into the holder up to the
stop.
!
C
aution
:
the lid will only close if a dust bag has been
inserted.
Cleaningthemotorprotectionfilter
Th
e motor protection
fil
ter should be cleaned regularly
by tapping out the dirt and rinsing.
Figure
●
Op
en the dust bag compartment lid.
Figure
●
Pull
out the motor protection
fil
ter in the direction of
the arrow.
●
Cl
ean the motor protection
fil
ter by tapping out the
dirt.
●
If
it is very dirty, the motor protection
fil
ter should
be rinsed out.
●
Th
e
fil
ter must then be left to dry for at least
24
hours.
●
Af
ter cleaning, insert the motor protection
fil
ter into
the appliance and close the dust bag compartment
lid.
18*
19
20
21
19
Replacingtheexhaustfilter
Replacingthemicro-hygienefilter
Th
is should be replaced with every replacement
fil
ter
pack
Figure
●
Op
en the dust bag compartment lid.
Figure
●
R
elease the
fil
ter holder by turning the locking lever
in the direction of the arrow.
●
R
emove the micro
-hyg
iene
fil
ter.
I
nsert the new
micro
-hyg
iene
fil
ter into the appliance.
●
I
nsert the
fil
ter holder in the appliance and lock it in
place.
ReplacingtheHepafilter
If
your appliance is equipped with a Hepa
fil
ter, this
should be replaced once a year.
Figure
●
Op
en the dust bag compartment lid.
Figure
●
U
nlock the Hepa
fil
ter by turning the locking lever in
the direction of the arrow and remove the
fil
ter from
the appliance.
●
I
nsert the new Hepa
fil
ter and lock it in place.
If
you have vacuumed up
fi
ne dust particles, clean the
motor protection
fil
ter and, if necessary, replace the
micro
-hyg
iene
fil
ter or Hepa
fil
ter.
Care
Alw
ays switch off the vacuum cleaner and disconnect
the power cord from the mains before cleaning the
vacuum cleaner.
Th
e vacuum cleaner and plastic
accessories can be cleaned with a commercial plastic
cleaner.
!
Donotuseascourer,glass-cleaningagentorall-
purposecleaningproduct.Neverimmersethe
vacuumcleanerinwater.
Th
e dust compartment can, if necessary, be cleaned
with a second vacuum cleaner or simply wiped with a
dry cloth or dusting brush.
Subj
ect to technical modi
fic
ations.
23
19
22
19
*depending on model