![background image](/i/cadillac/153789/cadillac-cts-sedan-2010/h/cadillac-cts-sedan-2010-228.png)
6-44
Infotainment System
3. Say the entire number without
pausing.
.
If the system recognizes
the number, it responds
with
“
OK, Dialing
”
and dials
the number.
.
If the system does not
recognize the number, it
confirms the numbers
followed by a tone. If the
number is correct, say
“
Yes
”
. The system responds
with
“
OK, Dialing
”
and dials
the number. If the number
is not correct, say
“
No
”
.
The system will ask for the
number to be re-entered.
Using the Digit Dial Command
1. Press and hold
b
g
for
two seconds:
.
For vehicles without a
navigation system, the
system responds with
“
Ready
”
followed by a tone.
.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone say
“
Hands Free
”
. The system
responds with
“
Ready
”
followed by a tone.
2. Say
“
Digit Dial
”
. The system
responds with
“
Digit dial using
<phone name>, please say the
first digit to dial
”
followed by
a tone.
3. Say the digit to be dialed one at
a time. Following each digit, the
system will repeat back the digit
it heard followed by a tone.
4. Continue entering digits until the
number to be dialed is complete.
After the whole number has
been entered, say
“
Dial
”
. The
system responds with
“
OK,
Dialing
”
and dials the number.
.
If an unwanted number is
recognized by the system,
say
“
Clear
”
at any time to
clear the last number.
.
To hear all of the numbers
recognized by the system,
say
“
Verify
”
at any time and
the system will repeat them.
Using the Call Command
1. Press and hold
b
g
for
two seconds:
.
For vehicles without a
navigation system, the
system responds with
“
Ready
”
followed by a tone.
.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone say
“
Hands Free
”
. The system
responds with
“
Ready
”
followed by a tone.
2. Say
“
Call
”
. The system responds
with
“
Call using <phone name>.
Please say the name tag
”
followed by a tone.