Инструкция для CADILLAC SRX CROSSOVER (2009)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Express-Down Window

This feature is on all windows. Press the switch to the
second position and release the switch to activate
the express-down feature. To stop the window as it is
lowering, press down or pull up briefly on the switch
again.

Express-Up Window

This feature is on all windows. Pull the switch up to
the second position and release the switch to activate
the express-up feature. To stop the window as it is
raising, pull up or press down briefly on the switch again.

Programming the Power Windows

If the battery on the vehicle has been recharged,
disconnected, or is not working, each power window will
need to be reprogrammed for the express-up feature
to work. Before reprogramming, replace or recharge
the vehicle’s battery.

To program each window:

1. With the ignition in ON/RUN, ACC/ACCESSORY, or

when Retained Accessory Power (RAP) is active,
close all doors.

2. Press and hold the power window switch until the

window is fully open.

3. Pull the power window switch up until the window is

fully closed.

4. Continue pulling the switch up for approximately

two seconds after the window is completely
closed.

The window is now reprogrammed. Repeat the process
for the other windows.

Express Window Anti-Pinch Feature

If any object is in the path of the window when
the express-up is active, the window will stop at the
obstruction and auto-reverse to a preset factory position.
Weather conditions such as severe icing may also cause
the window to auto-reverse. The window will return to
normal operation once the obstruction or condition is
removed.

2-17