Hurricane™ Haze 2D QRG
EN
4
Mounting
Before mounting this product, read the Safety Notes.
Product
Mounting
Diagram
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases the
numeric value when in a function
DMX Linking
The Hurricane™ Haze 2D can work with a DMX controller when linked by
DMX serial connections. Instructions for connecting and configuring this
product for DMX operation are in the User Manual. If you are not familiar
with DMX, download the DMX Primer from
www.chauvetlighting.com
.
Starting Address
The Hurricane™ Haze 2D uses up to two channels in its 2-channel DMX
mode, which defines the highest configurable address to
511
.
Remote or
Manual
Operation
The Hurricane™ Haze 2D can be operated manually, or with the included
wired remote control. Details can be found in the User Manual, available at
www.chauvetlighting.com
.
Important:
Using the LED Display, set the Fan and Haze output to 0. You
can then connect and operate the remote with the Hurricane™ Haze 2D.
If the digital display is touched while the Remote Control is in use, the
digital display will take control. A DMX controller will take priority
control over the digital display and Remote Control. The priority
control levels are:
1.
DMX
2.
Digital display
3.
Remote Control
Menu Options
Mode
Programming Steps
Description
DMX Mode
d***
001~512
Selects the DMX starting address
Manual Mode
Haze Volume
h001~h005
Low~High
Blower Speed
f001~f005
Low~High
DMX Values
2-CH
Channel
Function
Value
Percent/Setting
1
Blower Speed
000
255 Low~High
2
Haze Volume
000
255 Low~High
Feet
Safety Cable
Adjustment
Knob
Clamp
Floor Mounting
Overhead Mounting
