![background image](/i/d-link/127913/d-link-dgs-1510-52x-dgs-1510-28x/h/d-link-dgs-1510-52x-dgs-1510-28x-062.png)
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
53
Figure 4-31 DHCP Relay Pool Class Edit Settings window
The fields that can be configured are described below:
Parameter
Description
Relay Target
Enter the DHCP relay target for relaying packets that matches the
value pattern of the option defined in the DHCP class.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to remove the specified entry.
Click the
Back
button to return to the previous window.
DHCP Relay Information Settings
This window is used to configure and display the DHCP relay information.
To view the following window, click
Management > DHCP > DHCP Relay > DHCP Relay Information
Settings
, as shown below:
Figure 4-32 DHCP Relay Information Settings window
The fields that can be configured are described below:
Parameter
Description
Information Trust All
Select this option to enable or disable the DHCP relay agent to trust
the IP DHCP relay information for all interfaces.
Information Check
Select this option to enable or disable the DHCP relay agent to
validate and remove the relay agent information option in the received
DHCP reply packet.
Information Policy
Select the Option 82 re-forwarding policy for the DHCP relay agent.
Options to choose from are
Keep
,
Drop
, and
Replace
.
Keep
- Select to discard the packet that already has the relay option.