554
Understanding the Printer Menus
3 Press
button until
Admin Menu
is highlighted, and then press the
(Set)
button.
4 Press
button until
Secure Settings
is highlighted, and then press the
(Set)
button.
5 Ensure that
Panel Lock
is highlighted, and then press the
(Set)
button.
6 Ensure that
Panel Lock Set
is highlighted, and then press the
(Set)
button.
7 Press
button until
Enable
is highlighted, and then press the
(Set)
button.
8 Enter the new password, and then press the
(Set)
button.
NOTICE:
Be sure to remember the password. The procedure described
below allows you to reset the password, but the settings for Address Book and
Phone Book are cleared.
•
Turn off the printer. Then, while holding the
(Menu)
button, turn on the
printer. Perform steps 8 and 9.
9 Re-enter the password to confirm the password that you entered, and then
press the
(Set)
button.
The password has been changed.
NOTE:
If you change the password while
Panel Lock
is
Enable
, perform
steps 1 to 5 above. Press
button until
Change Password
is highlighted, and
then press the
(Set)
button. Perform steps 8 and 9 above to change the
password. This will change the password
.
Disabling the Panel Lock
1 Press the
(Menu)
button.
2 Press
button until
System Setup
is highlighted, and then press the
(Set)
button.
3 Press
button until
Admin Menu
is highlighted, and then press the
(Set)
button.
4 Press
button until
Secure Settings
is highlighted, and then press the
(Set)
button.
5 Ensure that
Panel Lock
is highlighted, and then press the
(Set)
button.
6 Ensure that
Panel Lock Set
is highlighted, and then press the
(Set)
button.