- 91 -
Appendix
5-2-2 Configuring S/PDIF Out
The S/PDIF Out jack
(Note 1)
can transmit audio signals to an external decoder for decoding to get the best au-
dio quality.
1. Connecting a S/PDIF Out Cable:
Connect a S/PDIF optical cable to an external decoder for transmitting the S/PDIF digital audio signals.
S/PDIF Optical Cable
(Note 1) The actual location of the S/PDIF Out connector may differ by model.
(Note 2) Enter the Digital Output(Optical) screen to configure further settings if you use the S/PDIF Out
connector on the back panel for digital audio output or enter the Digital Output screen if you
use the internal S/PDIF Out connector (SPDIF_O) for digital audio output.
2. Configuring S/PDIF Out:
On the Digital Output(Optical) screen
(Note 2)
, click the Default Format tab and then select the sample rate
and bit depth. Click OK to complete.