Wheel button
Dpi button
ID reset button
Mouse
Introduction
Congratulations on your purchase of the most innovative mini wireless mouse. With an
incredible sensitivity to surface details and high tracking speed than other mice, the mouse
can track reliably even on tricky polished or wood-grain surfaces. It offers even more
advance that will make you more productive and more comfortable.
2.4GHz Wireless laser mouse
Using state-of-art technology. High tracking speed and sensitivity.
Up to 10m effective working distance
USB Nano transceiver
Longer battery life
4 Directional Scrolling
Auto-Link, Plug and Play! No need to set the channel ID.
800/1600 DPI adjustable button
Battery indicator
Power on/ off switch
Back & Forward buttons
Stylish and modern shape with comfort grip
Power on/off switch
This product complies with IEC 60825-1, Class I laser product.
The product complies with FCC and CE rules.
Safety Notice
Please
DO NOT
direct the
laser beam at anyone's eyes.
Features
Battery cover
Receiver
Internet Forward & Backward button
Low power indicator
Receiver release
button
Receiver
A. Hardware Installation
A wrong battery placement
may cause batteries overheat.
Battery compartment cover
2 * AAA batteries
2. Connect the receiver
a. Turn on your PC.
b. Connect the receivere to USB port on PC
PC
USB port
The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.
Power on/off:
There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.
User can push DPI button to change the resolution. The LED on wheel bar will be flashed when dpi has been
sucessfully swithced.
1. Insert the batteries
a. Remove the battery compartment cover on the bottom case of the mouse.
b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.
c. Close the battery compartment cover properly.
d. Make sure the Power on-off swich on the bottom of the mouse is ON.
e. The Low Power LED on the wheel bar will blink 3 seconds if the mouse power is on.
Press the receiver
release button
