4

r

emote

 K

eyless

 e

ntry

 t

ransmItter

 (K

ey

 F

ob

)

F

 Optional equipment

 Unlock 

Press to unlock the driver’s door.  

Press again to unlock all doors.

 Lock 

Press to lock all doors. 

Note: Press and hold the Lock/Unlock  buttons 

to automatically fold/unfold the power mirrors

F

. 

To change the Auto Mirror Folding setting, go 

to Comfort and Convenience in the Vehicle 

Settings menu.

 Liftglass

F

Press twice to open the  liftglass. 

 Power Liftgate

F

Press twice to open or close the 

power   liftgate.

 Vehicle Locator/Panic Alarm

Press and release to locate your vehicle. 

The turn signal lamps will flash and the 

horn will sound.

Press and hold to activate the alarm. The 

turn signal lamps will flash and the horn will 

sound until the button is pressed again or 

the ignition is turned on.

 Remote Vehicle Start

Press and release the   Lock button 

and then press and hold the   button 

until the turn signal lamps flash (about 

4 seconds) to start the engine from outside 

the vehicle. After entering the vehicle, turn 

on the  ignition.

•  During a remote start, the engine will 

run for 10 minutes. 

•  Remote Start can be extended once by 

repeating the remote start procedure.

•  Press and hold the   button until 

the parking lamps turn off to cancel a 

remote start.

•  The heated/cooled seats

F

 will turn on 

during a remote start (if selected in the 

Vehicle Settings menu) when outside 

temperatures warrant.

Note: To change the remote lock, unlock, 

and remote start settings, go to Remote Lock, 

Unlock, Start in the Vehicle Settings menu.

See Keys, Doors and Windows in your Owner Manual.

Open/Close the Power Liftgate

  Press the   Power Liftgate button on  

the RKE transmitter twice.

  Press the 

 Power Liftgate knob on  

the overhead console.

  Press the touchpad (A) on the liftgate 

 handle to open the liftgate.

  Press the button (B) next to the liftgate latch to close the liftgate.

Programming the Liftgate Height

1.  Turn the Power Liftgate knob to the 3/4 mode position.

2.  Open the liftgate.

3.  Adjust the liftgate manually to the desired height.

4.  To save the setting, press and hold the button next to the liftgate 

latch for 3 seconds. The tail lamps will flash when the setting is saved.

See Keys, Doors and Windows in your Owner Manual.

P

ower

 l

IFtgate

F

A

B