Инструкция для GMC ALL-NEW YUKON DENALI XL (2015)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (20,1)

GMC Yukon Denali/Yukon XL Denali Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-7063681) - 2015 - 1st Edition - 6/6/14

2-20

Keys, Doors, and Windows

Pinch sensors are on the side
edges of the liftgate. If an object is
caught between the liftgate and the
vehicle and presses against a
sensor, the liftgate will reverse
direction and open fully. The liftgate
will remain open until it is activated
again or closed manually.

Setting the 3/4 Mode

To change the position the liftgate
stops at when opening:

1. Select MAX or 3/4 mode and

power open the liftgate.

2. Stop the liftgate movement at

the desired height by pressing
any liftgate switch. Manually
adjust the liftgate position if
needed.

3. Press and hold

next to the

latch on the outside of the
liftgate until the turn signals flash
and a beep sounds. This
indicates the setting has been
recorded.

The liftgate cannot be set below a
minimum programmable height.
If there is no light flash or sound,
then the height adjustment may be
too low.

Manual Operation

Select OFF to manually operate the
liftgate. See Manual Liftgate at the
beginning of this section.