Инструкция для GMC SIERRA 1500 (2015)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (31,1)

GMC Sierra Owner Manual (GMNA Localizing-U.S/Canada/Mexico-

7299746) - 2015 - crc - 6/5/14

Instruments and Controls

5-31

See

Tire Pressure Monitor System

on page 10-61

and

Tire Pressure

Monitor Operation on page 10-62

Remaining Oil Life

Turn the trip odometer reset stem
until REMAINING OIL LIFE
displays. An estimate of the oil's
remaining useful life is shown.
REMAINING OIL LIFE 99% means
99% of the current oil life remains.

When the remaining oil life is low,
the CHANGE ENGINE OIL SOON
message will appear on the display.
See

Engine Oil Messages on

page 5-37

. The oil should be

changed as soon as possible. See

Engine Oil on page 10-10

. In

addition to the engine oil life system
monitoring the oil life, additional
maintenance is recommended in the
Maintenance Schedule. See

Maintenance Schedule on
page 11-3

The Oil Life display must be reset
after each oil change. It will not
reset itself. Do not to reset the Oil
Life display at any time other than

when the oil has just been changed.
It cannot be reset accurately until
the next oil change. To reset the
engine oil life system, see

Engine

Oil Life System on page 10-13

Transmission Fluid Temperature

The temperature of the automatic
transmission fluid displays in either
degrees Celsius (°C) or degrees
Fahrenheit (°F).

Trailer Brake

On vehicles with the Integrated
Trailer Brake Control (ITBC) system,
turn the trip odometer reset stem
until TRAILER GAIN and TRAILER
OUTPUT displays.

TRAILER GAIN shows the Trailer
Gain setting. This setting can be
adjusted from 0.0 to 10.0 with either
a trailer connected or disconnected.

TRAILER OUTPUT shows the
power output to the trailer anytime a
trailer with electric brakes is
connected. Output is displayed as a

bar graph. Dashes may appear in
the TRAILER OUTPUT display if a
trailer is not connected.

Hourmeter

This display shows the total number
of hours the engine has run.

Unit

This will change the displays on the
instrument cluster and DIC to either
metric or English (US)
measurements. To change the units,
press the trip odometer reset stem
when UNITS is displayed to enter
the Unit menu. Turn the trip
odometer reset stem to switch
between English and metric. Press
the trip odometer reset stem when
the desired setting is displayed.

Compass

The vehicle may have a compass in
the Driver Information Center (DIC).
See

Compass on page 5-5