![background image](/i/gmc/156474/gmc-sierra-1500-denali-2014/h/gmc-sierra-1500-denali-2014-246.png)
Black plate (42,1)
GMC Sierra Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
5853626) - 2014 - 3rd crc - 6/6/14
7-42
Infotainment System
Using the
“
Digit Dial
”
Command
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
“
Correction
”
at any time to clear the
last number.
To hear all of the numbers
recognized by the system, say
“
Verify
”
at any time.
1. Press
g
. The system responds
“
Say a command or say help,
”
followed by a tone.
2. Say
“
Digit Dial.
”
3. Say each digit, one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone. After
the last digit has been entered,
say
“
Dial.
”
Once connected, the person called
will be heard through the audio
speakers.
Using the
“
Re-dial
”
Command
1. Press
g
. The system responds
“
Say a command or say help,
”
followed by a tone.
2. After the tone, say
“
Re-dial.
”
The
system dials the last number
called from the connected cell
phone.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
.
Press
g
to answer the call.
.
Press
i
to ignore a call.
Call Waiting
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
.
Press
g
to answer an incoming
call when another call is active.
The original call is placed
on hold.
.
Press
g
again to return to the
original call.
.
To ignore the incoming call, no
action is required.
.
Press
i
to disconnect the
current call and switch to the call
on hold.
Three-Way Calling
Three-way calling must be
supported on the cell phone and
enabled by the wireless service
carrier.
1. While on a call, press
g
.
2. Say
“
Three-way call.
”