Инструкция для GMC TERRAIN DENALI (2015)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (3,1)

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/

Mexico-7707484) - 2015 - CRC - 5/8/14

Instruments and Controls

5-3

ACC/ACCESSORY or ON/RUN/
START, move the windshield wiper
lever to select the wiper speed.

HI:

Use for fast wipes.

LO:

Use for slow wipes.

INT (Intermittent Wipes):

Move

the lever up to INT for intermittent
wipes, then turn the

INT band

up for more frequent wipes or down
for less frequent wipes.

OFF:

Use to turn the wipers off.

1X (Mist):

For a single wipe, briefly

move the wiper lever down. For
several wipes, hold the wiper
lever down.

FRONT (Windshield

Washer):

Pull the windshield wiper

lever toward you to spray windshield
washer fluid and activate the wipers.

The wipers will continue until the
lever is released or the maximum
wash time is reached. When the
windshield wiper lever is released,
additional wipes may occur
depending on how long the
windshield washer had been
activated. See

Washer Fluid on

page 10-20

for information on filling

the windshield washer fluid
reservoir.

{

Warning

In freezing weather, do not use
the washer until the windshield is
warmed. Otherwise the washer
fluid can form ice on the
windshield, blocking your vision.

Clear snow and ice from the wiper
blades before using them. If frozen
to the windshield, carefully loosen or
thaw them. Damaged blades should
be replaced. See

Wiper Blade

Replacement on page 10-26

Heavy snow or ice can overload the
wiper motor.

Wiper Parking

If the ignition is turned to LOCK/
OFF while the wipers are on LO, HI,
or INT, they will immediately stop.

If the windshield wiper lever is then
moved to OFF before the driver
door is opened or within 10 minutes,
the wipers will restart and move to
the base of the windshield.

If the ignition is turned to LOCK/
OFF while the wipers are performing
wipes due to windshield washing,
the wipers continue to run until they
reach the base of the windshield.

Rear Window Wiper/
Washer

The rear wiper controls are on the
end of the windshield wiper lever.