Инструкция для GMC YUKON (2014)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (47,1)

GMC Yukon/Yukon XL Owner Manual (GMNA-Localizing-U.S./Canada-

6081505) - 2014 - crc - 4/23/13

Instruments and Controls

5-47

LIGHTS ON (default):

The exterior

lamps will flash when you press the
unlock button on the RKE
transmitter.

NO CHANGE:

No change will be

made to this feature. The current
setting will remain.

To select a setting, press the set/
reset button while the desired
setting is displayed on the DIC.

DELAY DOOR LOCK

This feature allows you to select
whether or not the locking of the
vehicle's doors and liftgate will be
delayed. When locking the doors
and liftgate with the power door lock
switch and a door or the liftgate is
open, this feature will delay locking
the doors and liftgate until
five seconds after the last door is
closed. You will hear three chimes
to signal that the delayed locking
feature is in use. The key must be
out of the ignition for this feature to
work. You can temporarily override
delayed locking by pressing the

power door lock switch twice. See

Delayed Locking on page 2-8

for

more information.

Press the customization button until
DELAY DOOR LOCK appears on
the DIC display. Press the set/reset
button once to access the settings
for this feature. Then press the
customization button to scroll
through the following settings:

OFF:

There will be no delayed

locking of the vehicle's doors.

ON (default):

The doors will not

lock until 5 seconds after the last
door or the liftgate is closed.

NO CHANGE:

No change will be

made to this feature. The current
setting will remain.

To select a setting, press the set/
reset button while the desired
setting is displayed on the DIC.

EXIT LIGHTING

This feature allows you to select the
amount of time you want the
exterior lamps to remain on when it

is dark enough outside. This
happens after the key is turned from
ON/RUN to LOCK/OFF.

Press the customization button until
EXIT LIGHTING appears on the DIC
display. Press the set/reset button
once to access the settings for this
feature. Then press the
customization button to scroll
through the following settings:

OFF:

The exterior lamps will not

turn on.

30 SECONDS (default):

The

exterior lamps will stay on for
30 seconds.

1 MINUTE:

The exterior lamps will

stay on for 1 minute.

2 MINUTES:

The exterior lamps will

stay on for 2 minutes.