Инструкция для GMC YUKON (2014)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (28,1)

GMC Yukon/Yukon XL Owner Manual (GMNA-Localizing-U.S./Canada-

6081505) - 2014 - crc - 4/23/13

9-28

Driving and Operating

Running the Vehicle
While Parked

It is better not to park with the
engine running.

If the vehicle is left with the engine
running, follow the proper steps to
be sure the vehicle will not move.
See

Shifting Into Park on page 9-24

and

Engine Exhaust on page 9-27

If parking on a hill and pulling a
trailer, see

Driving Characteristics

and Towing Tips on page 9-60

Automatic
Transmission

If the vehicle is has an automatic
transmission, it has an electronic
shift position indicator within the
instrument panel cluster. This
display comes on when the ignition
key is turned to the ON/RUN
position.

There are several different positions
for the shift lever.

Heavy Duty 6-Speed Automatic

Transmission Shown (Light Duty

Similar)

See

“

Range Selection Mode

”

under

Manual Mode on page 9-31

P (Park):

This position locks the

rear wheels. It is the best position to
use when starting the engine
because the vehicle cannot move
easily. When parked on a hill,
especially when the vehicle has a
heavy load, you might notice an
increase in the effort to shift out of
P (Park). See

“

Torque Lock

”

under

Shifting Into Park on page 9-24

for

more information.

{

Warning

It is dangerous to get out of the
vehicle if the shift lever is not fully
in P (Park) with the parking brake
firmly set. The vehicle can roll.

Do not leave the vehicle when the
engine is running. If you have left
the engine running, the vehicle
can move suddenly. You or others
could be injured. To be sure the
vehicle will not move, even when
you are on fairly level ground,
always set the parking brake and

(Continued)