Server Blade Enclosure Infrastructure

Pooled power for true N+N power redundancy through up to six (6) hot-plug, high-
efficiency, common slot enclosure-based power supplies (configuration dependent).
Up to ten (10) enclosure-based hot-plug HP Active Cool fans that scale to meet future
demands, optimize airflow, reduce power draw, and improve acoustic performance.
Dual grid power providing redundant rack enclosure power feeds to the server blade
enclosure.
HP Dynamic Power Saver Mode monitors the total enclosure power consumption in real
time and automatically adjusts with change in demand for improved efficiency and
reliability.HP Dynamic Power Capping safely limits power usage without impacting
performance by capping peak usage instead of average power usage, removes risk to
electrical infrastructure with a fast-acting, hardware-based capping algorithm, and reclaims
more power by dynamically controlling power limits based on workload demand.
Up to eight interconnect modules per server blade enclosure providing four simultaneous
redundant fabrics for FlexFabric, Virtual Connect Ethernet, Fibre Channel, InfiniBand, Pass
Thru Ethernet, etc.
Enclosure crosslinks between adjacent enclosures to provide interconnect module-to-
module connections or as Virtual Connect module stacking links.
Optional enclosure redundant Onboard Administrator system management module.

Warranty

This product is covered by a global limited warranty and supported by HP Services and a
worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is
available for three years from date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Enhancements to warranty services are available through HP
Care Pack services or customized service agreements. Certain restrictions and exclusions apply.
Hard drives have either a one year or three year warranty; refer to specific hard drive QuickSpecs
for details.

NOTE: 

Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support. Warranty

repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts
fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and
labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional
CSR parts are also designed for easy replacement but may involve added complexity. Customers
may choose to have HP replace Optional CSR parts at no charge. Additional information
regarding worldwide limited warranty and technical support is available at

http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

QuickSpecs

HP ProLiant BL460c Generation 9 (Gen9) Server

Blade

Standard Features

DA - 15052   Worldwide QuickSpecs — Version 1 — 9.9.2014

Page  10