NOTE:
This section lists some of the steps required to configure a Factory Integrated Model (configure-to-order or CTO
server). To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact
your local sales representative for information on CTO product offerings and requirements.
NOTE:
Configure-to-order server blades must start with a CTO Blade Server.
NOTE:
FIO indicates that this option is only available as a factory installable option.
NOTE:
All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard
drives ordered with the server.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
HP ProLiant BL460c Gen9 E5-v3 10Gb/20Gb FlexibleLOM Configure-to-order
Blade Server
727021-B21
Configurable Models ship with:
One (1) FlexibleLOM connector providing a choice for one (1) of the supported
10Gb/20Gb FlexibleLOMs (see Step 2)
Two (2) HP small form factor hot-plug SAS/SATA/ HDD or SSD hard drive bays
Two (2) x16 PCIe I/O expansion slots (one Type A, one Type A/B)
One (1) integrated USB connector and one (1) MicroSDHC connector
One (1) TPM connector
HP iLO Management (standard)
Step 2: Choose Required Options (one of the following from each list unless
otherwise noted)
HP Processors
NOTE:
All configure-to-order processor kits (i.e. xxxxxx-L21) contain one (1)
processor.
NOTE:
If two processors are desired, select one xxxxxx-L21 here in Step 2 and
one xxxxxx-B21 in Step 4.
E5-2600 v3 series Processors
HP BL460c Gen9 Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/135W) FIO
Processor Kit
726987-L21
HP BL460c Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W) FIO
Processor Kit
726988-L21
HP BL460c Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W) FIO
Processor Kit
726989-L21
HP BL460c Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W) FIO
Processor Kit
726990-L21
HP BL460c Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W) FIO
Processor Kit
726991-L21
HP BL460c Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) FIO
Processor Kit
726992-L21
HP BL460c Gen9 Intel® Xeon® E5-2683v3 (2GHz/14-core/35MB/120W) FIO
Processor Kit
726993-L21
HP BL460c Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) FIO
Processor Kit
726994-L21
HP BL460c Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) FIO
Processor Kit
726995-L21
HP BL460c Gen9 Intel® Xeon® E5-2623v3 (3GHz/4-core/10MB/105W) FIO
Processor Kit
726996-L21
HP BL460c Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) FIO
Processor Kit
726997-L21
HP BL460c Gen9 Intel® Xeon® E5-2685v3 (2.6GHz/12-core/30MB/120W) FIO
Processor Kit
726998-L21
QuickSpecs
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
Configuration Information - Factory Integrated Models
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 19