System Unit

Dimensions

 (H x W x D) 8 SFF and 10 SFF 1.7 x 17.1 x 27.5 inches (4.32 x 43.47 x 69.85 cm)

4 LFF - 1.7 x 17.1 x 29.5 inches (4.32 x 43.46 x 75.0 cm)

Weight

(approximate)

Maximum:

(all hard drives, power
supply, and processor
installed)

8 SFF Chassis 33.3 lb. (15.31 kg) NOTE:
Includes 2 SFF Option for a total of 10 SFF
HDD

Minimum:

(one hard drive, power
supply, and processor
installed)

4 LFF Chassis 37 lb. (16.78kg)
8SFF Chassis 27 lb. (12.25 kg)
4 LFF Chassis 30.36 lb. (13.77 kg)

Input Requirements

Range Line Voltage

100 to 120 VAC
200 to 240 VAC

BTU Rating

Maximum

For 800W Power Supply: 3207 BTU/hr (at 100
VAC), 3071 BTU/hr (at 200 VAC), 3112
BTU/hr (at 240 VAC) for China Only
For 500W Power Supply: 1979 BTU/hr (at 100
VAC), 1911 BTU/hr (at 200 VAC), 1965
BTU/hr (at 240 VAC) for China Only

Power Supply Output

Rated Steady-State
Power

For 1400W Power Supply: 1400W (at 100
VAC), 1400W (at 240 VAC), 1400W (at 240
VAC
For 800W Power Supply: 800W (at 100 VAC),
800W (at 240 VAC), 800W (at 240 VAC) input
for China only
For 500W Power Supply: 500W (at 100 VAC),
500W (at 240 VAC), 500W (at 240 VAC) input
for China only

Maximum Peak Power

For 1400W Power Supply: 1400W (at 100 to
127 VAC), 1400W (at 200 to 240 1VAC),
1400W (at 240 VAC) input for China only
For 800W Power Supply: 800W (at 100 to
127 VAC), 800W (at 200 to 240 1VAC), 800W
(at 240 VAC) input for China only
For 500W Power Supply: 500W (at 100 to
127 VAC), 500W (at 200 to 240 VAC), 500W
(at 240 VAC) input for China only

System Inlet
Temperature

Standard Operating
Support

10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 20°C/hr (36°F/hr). The upper limit and rate
of change may be limited by the type and
number of options installed. For approved
hardware configurations, the supported
system inlet range is extended to be: 5° to
40°C (41° to 104°F) at sea level with an
altitude derating of 1.0°C per every 175 m
(1.8°F per every 574 ft) above 900 m (2953 ft)
to a maximum of 3050 m (10,000 ft). The
approved hardware configurations for this
system are listed at the
URL:

www.hp.com/go/proliant/Ashrae

 For

approved hardware configurations, the
supported system inlet range is extended to

QuickSpecs

HP ProLiant DL360 Generation9 (Gen9)

Technical Specifications

DA - 15033   Worldwide QuickSpecs — Version 1 — 9.9.2014

Page  39