Maximum Internal
Storage
CAPACITY
CONFIGURATION
Hot Plug SFF SAS
31.2TB
24+2 x 1.2TB (with optional rear
SFF drive cage)
Hot Plug SFF SATA
26.0TB
24+2 x 1TB (with optional SFF
drive cage)
Hot Plug LFF SAS
90.0TB
12+3 x 6TB (with optional rear
LFF drive cage)
Hot Plug LFF SATA
90.0TB
12+3 x 6TB (with optional rear
LFF drive cage)
Hot Plug SFF SAS SSD
31.2TB
24+2 x 1.6TB (with optional rear
SFF drive cage)
Hot Plug LFF SATA SSD
24.0TB
12+3 x 1.6TB (with optional rear
LFF drive cage)
Power Supply
HP 500W Flex Slot Platinum Hot Plug Power Supply
HP 800W Flex Slot Platinum Hot Plug Power Supply
HP 1400W Flex Slot Platinum Plus Hot Plug Power Supply
HP Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that
allows for hot plug, tool-less installation into HP ProLiant Gen9 Performance Servers. Flex Slot
power supplies are certified for high-efficiency operation and offer multiple power output options,
allowing users to "right-size" a power supply for specific server configurations. This flexibility
helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in
the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This
jumper cord is also included with each standard AC power supply option kit. If a different power
cord is required, please check the
ProLiant Power Cables web page
.
To review the power requirements for your selected system, please use the HP Power Advisor
Tool located at
www.hp.com/go/hppoweradvisor
.
Power specifications and technical content for all HP Server power supplies can be found at
www.hp.com/go/proliant/powersupply
.
NOTE:
Mixing of power supplies in the same server is not supported. All power supplies must be
of the same input voltage, output rating, and efficiency rating. If non-matching power supplies are
installed, you may receive an error message and/or experience operational issues with your
server.
System Fans
One of the following
depending on Model
Non-redundant
Redundant
2P model
6 fans
NOTE:
1P models typically ship with 4 standard fans. The second processor option kit contains 2
additional fans.
NOTE:
High Performance Temperature Fan Kit is available to meet ambient temperature
environments (719079-B21)
NOTE:
the 12LFF and 24SFF chassis ship with 6 High Performance fans as standard
NOTE:
High Performance Temperature Fan Kit is required for GPU support.
NOTE:
Additional HP 12Gb SAS Expander Card (727250-B21) and the 8SFFf Bay kit (719067-
B21) will ship with 6 High efficiency fans
QuickSpecs
HP ProLiant DL380 Generation9 (Gen9)
Standard Features
DA - 15034 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 6