QuickSpecs
HP Z1 G2 Workstation
Overview
c04111346 — DA – 14798 Worldwide — Version 8 — April 1, 2015
Page 4
Anti-glare: No glass, anti-glare as CTO option
Convertibility
The Z1 can either be placed on the desktop in the traditional display method or mounted on a wall with
the industry standard VESA mount. The VESA mount on the Z1 uses a 100x100 VESA mount pattern.
Expansion Slots
(see
system board section for
more details)
1 MXM 3.1 (dedicated for graphics)
2 miniPCIe/mSATA full-length
Expansion Bays
(see
storage section for more
details)
1 internal 3.5" bay, or
2 internal 2.5" bays
Side I/O
1 USB 3.0, 1 USB 3.0 Charging Data Port, 2 ThunderboltTM 2 ports (Optional**),1 SD 4.0 Media Card
Reader, 1 Headphone, 1 Microphone
** An Optical drive cannot be configured if the Thunderbolt option is selected.
Internal I/O
1 USB 2.0 Type A on Rear IO board, 2 internal on 9-pin header (not available on touch capable option)
Rear I/O
1 DisplayPort v1.1, 4 USB 2.0, 1 RJ45 LAN, 1 Subwoofer Output, 1 optical S/PDIF Output, 1 Audio Line-
in, and 1 Audio Line-out
Chassis Dimensions
(HxWxD)
Vertical display orientation WITH stand: 530.0mm x 660.4mm x 419.1mm (20.8in. x 26in. x 16.5in.);
Standard display orientation WITHOUT stand: 457.2mm x 660.4mm x 81.28mm (18in. x 26in. x 3.2in.)
Service/Shipping orientation: 116mm x 660mm x 510mm
Weight
Exact weights depend upon configuration;
Max system weight WITH stand: 21.32 kg (47 lbs);
Stand weight 5.9 kg (13 lbs)
Temperature
Operating:
40° to 95°F (5° to 35°C)
Non-operating
-40° to 140°F (-40° to 60°C)
Humidity
Operating:
8% to 85%
Non-operating
8% to 90%
Maximum Altitude
(non-
pressurized)
Operating:
3,000 m (10,000 ft)
Non-operating
9,100 m (30,000 ft).
Power Supply
400 watts wide-ranging, active Power Factor Correction, 90% Efficient
The Power Supply Efficiency Report for this product may be found at these links:
http://www.plugloadsolutions.com/psu_reports/HEWLETT%20PACKARD_650503-
001_ECOS%202720.1_400W_Report.pdf
Chipset
Intel® C226 chipset
Memory
4 DIMM slots, supporting up to 32GB ECC or 16GB non-ECC Unbuffered DDR3 1866 MT/s Components.
Actual Memory speed is determined by the processor.
Memory Disclaimers
The CPU determines the speed at which the memory is clocked. If a 1600MT/s capable CPU is used in
the system, the maximum speed the memory will run at is 1600MT/s regardless of the specified speed
of the memory.
Workstation ISV
Certifications
See the latest list of certifications at:
http://www.hp.com/united-states/campaigns/workstations/partnerships.html