![background image](/i/hp/127599/hp-z440-e5-1620v3-16gb2x8gbddr4-2133-256gb-ssd-g1x58ea/h/hp-z440-e5-1620v3-16gb2x8gbddr4-2133-256gb-ssd-g1x58ea-064.png)
QuickSpecs
HP Z440 Workstation
Technical Specifications - Networking and Communications
c04400038 — DA - 15098 Worldwide — Version 7 — April 1, 2015
Page 64
Power Requirement
4.1W idle without EEE link partner
3.2W idle with EEE link partner
4.2W maximum
Network Transfer Rate
10BASE-T (half-duplex) 10 Mb/s
10BASE-T (full-duplex) 20 Mb/s
100BASE-TX (half-duplex) 100 Mb/s
100BASE-TX (full-duplex) 200 Mb/s
1000BASE-T (full-duplex) 2000 Mb/s
Operating Temperature
32° to 131°F (0° to 55° C)
Operating Humidity
10% to 95% non-condensing
Dimensions
(H x W x D)
5.3 x 2.5 in (13.50 cm x 6.4 cm) (without brackets)
Operating System Driver
Support
Windows 7 Professional 32-bit and 64-bit.
Red Hat Enterprise Linux(RHEL) WS4, 5, 6 Desktop/Workstation
Novell SLED 10 & SLED 11
Kit Contents
HP 361T PCIe Dual Port Gigabit NIC PCA with a standard height bracket
attached to it (the low profile bracket is included in the clamshell that the
PCA ships in)
Product Warranty statement and the Quick Install Card (QIC).
Intel 7260 802.11
a/b/g/n PCIe WLAN NIC
Operating Humidity
Operating 10% to 90% (non-condensing)
Non-operating 5% to 95% (non-condensing)
Dimensions
(H x W x D)
Native HMC: 26.8 x 30.0 x 2.4 mm
Carrier Card Assembly 3.3 x 4.7 in (84 x 119 mm)
Kit Contents
PCIe x1 card with full height bracket, rf antenna, antenna cable, separate
low profile bracket, software CD and warranty.
Notes
1.
WLAN supplier's client utility is required for Cisco Compatible
Extensions support with Microsoft Windows XP. WLAN may also
be compatible with certain third-party software supplicants.
WLAN supplier IHV extensions required for Cisco Compatible
Extensions support for Microsoft Windows Vista.
2.
Check latest software/driver release for updates on supported
security features.
3.
Maximum output power may vary by country according to local
regulations.
4.
In Power Save Polling mode and on battery power.
5.
Receiver sensitivity is measured at a packet error rate of 8% for
802.11b (CCK modulation) and a packet error rate of 10% for
802.11a/g (OFDM modulation).