![background image](/i/hp/127604/hp-z840-e5-2620v3-16gb-ddr4-2133-2x8gb-1tb-sata-7200-hdd-g1x56ea/h/hp-z840-e5-2620v3-16gb-ddr4-2133-2x8gb-1tb-sata-7200-hdd-g1x56ea-058.png)
QuickSpecs
HP Z840 Workstation
Technical Specifications – Graphics
c04400043 — DA – 15098 — Worldwide — Version 8 — April 1, 2015
Page 58
Additional DisplayPort-to-VGA or DisplayPort-to-DVI adapters are available
as Factory Configuration or Option Kit accessories.
Maximum Resolution
DisplayPort:
- 4096x2160 @24bpp 60Hz
Dual Link DVI:
- 2560x1600 (requires DP to DL-DVI adapter)
Single Link DVI:
- 1920x1200 (requires DP to DVI adapter)
VGA:
- 1920x1200 (requires DP to VGA adapter)
Image Quality Features
Advanced support for 8-bit, 10-bit, and 16-bit per RGB color component.
High bandwidth scaler for high quality up and downscaling
Display Output
Max number of monitors supported using DisplayPort 1.2a:
- 4 direct attached monitors
- 6 using DP 1.2a with MST and HBR2 enabled monitors
Monitor chaining from a single DisplayPort (subject to a max of 6 total
monitors across all outputs, requires use of DisplayPort enabled monitors
supporting MST and HBR2):
- one 4096x2160 display
- two 2560x1600 displays
- four 1920x1200 displays
Shading Architecture
Shader Model 5.0
Supported Graphics APIs
OpenGL 4.4
OpenCL 1.2 and 2.0
DirectX 11.2 / 12
AMD Mantle
Available Graphics
Drivers
Windows 8.1 / 8 (64-bit and 32-bit)
Windows® 7 (64-bit and 32-bit)
Linux
HP qualified drivers may be preloaded or available from the HP support
Web site:
http://welcome.hp.com/country/us/en/support.html
Notes
1. AMD Eyefinity technology supports up to six DisplayPort™ monitors on
an enabled graphics card. Supported display quantity, type and resolution
vary by model and board design; confirm specifications with manufacturer
before purchase. To enable more than two displays, or multiple displays
from a single output, additional hardware such as DisplayPort-ready
monitors or DisplayPort 1.2 MST-enabled hubs may be required. See
www.amd.com/eyefinityfaq for full details.
2. OpenGL 4.4 support available with driver 14.301.xxx or later.
3. OpenCL 2.0 support planned in driver updates for early 2015.
4. For HP Z440 Workstation configurations, the HP Z4 Fan and Front Card