![background image](/i/hyundai/23598/hyundai-h-cdm8015/h/hyundai-h-cdm8015-007.png)
7
the front panel; otherwise you are not able to install the trim frame. When the trim frame being installed, the side
with the groove should face down and fixed first.
2. DIN REAR-MOUNT (Method B)
For this method, use the screw holes in the lateral sides of the unit. Fix the unit with the help of the factory radio
mounting brackets.
1. Select a position in which the screw holes of the brackets (3) are aligned
with the screw holes in the unit body, and screw in two screws (2) in each side.
2. Screw.
3. Factory radio mounting brackets.
4. Vehicle dashboard.
5. Lock (remove this part).
Note: The outer trim frame and mounting sleeve are not used for method of installation.
Installing the front panel
Insert the right side of the panel, and then press on the left side until the click.
To detach the front panel, press RELEASE button.
Anti-theft system
The front panel of this unit can be stored in the included protective case when not in used and carried away when
you leave the vehicle to deter theft.
Switch off the power of the unit. Detach the front panel, then put it to the protective case and take it with you.