7
2. DIN REAR-MOUNT (Method B)
For this method, use the screw holes in the lateral sides of the unit. Fix the unit with the help of the factory radio mounting
brackets.
1. Select a position in which the screw holes of the brackets (3) are aligned with the screw
holes in the unit body, and screw in two screws (2) in each side.
2. Screw.
3. Factory radio mounting brackets.
4. Vehicle dashboard.
5. Lock (remove this part).
Note: The outer trim frame and mounting sleeve are not used for method of installation.
Installing the front panel
Insert the left side of the panel, then insert the right side. Close the panel.
To detach the front panel, first press OPEN button to flip down the panel. When the front panel is in horizontal position, slide the
panel to left and then pull it out.