4
Before you call for service
•
If there is no light in the cavity:
- the bulb blown out;
- the door of the oven is not closed.
•
If the oven fails to operate:
- check to ensure that the control panel is programmed correctly and the timer is set.
- check to ensure that the door is securely closed engaging the door safety lock system. Otherwise, the microwave energy will not flow into the
oven.
IF NONE OF THE ABOVE RECTIFY THE SITUATION, THEN CONTACT A QUALIFIED TECHNICIAN. DO NOT TRY TO ADJUST OR REPAIR
THE OVEN YOURSELF.
Radio interference
•
Operation of the microwave oven can cause interference to your radio, TV or similar equipment.
•
When there is interference, it may be reduced or eliminated by taking the following measures:
- clean door and sealing surface of the oven.
- reorient the receiving antenna of radio or television.
- relocate the microwave oven with respect to the receiver.
- move the microwave oven away from the receiver.
- plug the microwave oven into a different outlet so that microwave oven and receiver are on different branch circuits.
Installation
•
Make sure that all the packing materials are removed from the inside of the door.
•
Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing surface, broken or loose door hinges and latches and
dents inside the cavity or on the door. If there is any damage, do not operate the oven and contact qualified service personnel.
•
This microwave oven must be placed on a flat, stable surface to hold its weight and the heaviest food likely to be cooked in the oven.
•
Do not place the oven where heat, moisture or high humidity are generated, or near combustible materials.
•
For correct operation, the oven must have sufficient airflow. Keep the oven at least 8cm away from both side walls and 10cm away from rear wall to
ensure the correct ventilation.
•
Do not cover or block any openings on the appliance. Do not remove feet.
