![background image](/i/ibanez/135821/ibanez-t30/h/ibanez-t30-009.png)
7
EN
G
LI
SH
Names and Function on Each Part
1. GUITAR - INPUT: 1/4” phone jack input.
2. POWER LED: This LED will light when amp power is activated by
power switch.
3. GUITAR - VOLUME: Controls the pre-amplifier level.
4. GUITAR - 2 BAND EQ: Refer to the spec sheet at the end of this
manual for frequencies and levels.
5. GUITAR - CHORUS SPEED: Controls the speed of the chorus ef-
fect. Turn this control to the right to increase the speed.
6. GUITAR - CHORUS switch: This turns the chorus effect on / off.
7. MICROPHONE - INPUT: Balanced input terminal with XLR Jack.
1-GND, 2-HOT, 3-COLD.
8. MICROPHONE - VOLUME: Controls the pre-amplifier level.
9. MICROPHONE - 2 BAND EQ: Refer to the spec sheet at the end
of this manual for frequencies and levels.
10. MASTER - REVERB: Controls the reverb level.
11. MASTER - VOLUME: Controls the overall output level of the amplifier.
12. PHONES: 3.5mm stereo mini output jack for stereo headphones. The
sound is not reproduced through the built-in speaker when head-
phones are in use. The LINEOUT signal will still produce output.
Warning:
This phones output can produce lots of volume. Ensure that the MAS-
TER and AUX VOLUME has been turned down before beginning to
play using the headphones, and then slowly increase the volume until
it has reached the desired level. Note inserting or removing head-
phones at high volume levels may result in damage to the headphones
and to the user’s hearing.
13. AUX IN: 3.5mm stereo mini jack. This jack is designed to be con-
nected to the headphone output of a portable CD or MP3 player, or
similar device. Use the volume control of your portable player along
with the volume control on the amp to adjust the desired volume.
14. AC INPUT: Connect the included AC power cable to this connec-
tor. Only use the voltage indicated on the panel.
15. POWER SWITCH: This switch turns the power on / off. When you
are not using the amp, please leave it turned off.
16. TILT UP BAR: The built-in tilt system allows for better monitoring.