![background image](/i/infiniti/155565/infiniti-fx50-2009/h/infiniti-fx50-2009-443.png)
Black plate (444,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SDI1663
1. Wear indicator
2. Wear indicator location mark
Tire wear and damage
WARNING
.
Tires should be periodically in-
spected for wear, cracking, bulging
or objects caught in the tread. If
excessive wear, cracks, bulging or
deep cuts are found, the tire(s)
should be replaced.
.
The original tires have built-in tread
wear indicators. When wear indica-
tors are visible, the tire(s) should be
replaced.
.
Tires degrade with age and use.
Have tires, including the spare, over
6 years old checked by a qualified
technician, because some tire da-
mage may not be obvious. Replace
the tires as necessary to prevent
tire failure and possible personal
injury.
.
Improper service of the spare tire
may result in serious personal
injury. If it is necessary to repair
the spare tire, contact an INFINITI
dealer.
.
For additional information regarding
tires, refer to
“
Important Tire Safety
Information
”
(US) or
“
Tire Safety
Information
”
(Canada) in the War-
ranty Information Booklet.
Replacing wheels and tires
When replacing a tire, use the same size,
tread design, speed rating and load carry-
ing capacity as originally equipped. (See
“
SPECIFICATIONS
”
in the
“
9. Technical and
consumer information
”
section for recom-
mended types and sizes of tires and
wheels.)
WARNING
.
The use of tires other than those
recommended or the mixed use of tires
of different brands, construction (bias,
bias-belted or radial), or tread patterns
can adversely affect the ride, braking,
handling, ground clearance, body-to-tire
clearance, tire chain clearance, speed-
ometer calibration, headlight aim and
bumper height. Some of these effects
may lead to accidents and could result
in serious personal injury.
.
If the wheels are changed for any
reason, always replace with wheels
which have the same off-set dimension.
Wheels of a different off-set could cause
premature tire wear, degrade vehicle
handling characteristics and/or interfer-
ence with the brake discs/drums. Such
interference can lead to decreased
braking efficiency and/or early brake
pad/shoe wear. See
“
WHEELS AND
TIRES
”
in the
“
9. Technical and con-
sumer information
”
section of this
manual for wheel off-set dimensions.
8-38
Maintenance and do-it-yourself